Popular Standards |
|
ANSI C78.223 | AMERICAN STANDARD INCANDESCENT LAMPS,PS-35 BULB |
ANSI C78.224 | AMERICAN STANDARD INCANDESCENT LAMPS,PS-40 BULB |
ANSI C78.225 | AMERICAN STANDARD INCANDESCENT LAMPS,PS-52 BULB |
ANSI C78.226 | INCANDESCENT LAMPS P-25 BULB,MED.SCREW BASE |
ANSI C78.227 | A-23 BULB,DBL-CONTACT MED SCR BASE INCADESCNT LAMP |
ANSI C78.233 | INCANDESCENT LAMPS G-30 BULB,MED.SCREW BASE |
ANSI C78.234 | AMERICAN STANDARD INCANDESCENT LAMPS,G-40 BULB |
ANSI C78.235 | AMERICAN STANDARD INCANDESCENT LAMPS G-40 BULB |
ANSI C78.236 | R-40 BULB(SOFT GLASS)MED.SKIRTED SCREW BASE INCNDS |
ANSI C78.237 | R-40 BULB(SOFT GLASS)MED.SCREW BASE INCANDESCENT |
ANSI C78.238 | INCANDESCENT LAMPS SCREW BASE PAR-38 BULB,MEDIUM |
ANSI C78.245 | INCANDESCENT LAMPS,PS-25 BULB,MOGUL SCREW BASE |
ANSI C78.248 | INCANDESCENT LAMPS T-64 BULB,MOGUL BIPOST BASE |
ANSI C78.251 | R-30 BULB MED.SCREW BASE INCANDESCENT LAMP |
ANSI C78.253 | A23 BULB,MED.SCREW BASE INCANDESCENT LAMPS |
ANSI C78.254 | R-20 BULB MED.SCREW BASE INCANDESCENT LAMP |
ANSI C78.255 | R-40 BULB(HARD GLASS) MOGUL SCREW BASE, INCANDESCE |
ANSI C78.256 | R-40 BULB(HARD GLASS) MEDIUM SCREW BASE INCANDESCE |
ANSI C78.257 | R-40 BULB(HARD GLASS) MEDIUM SKIRTED SCREW BASE |
ANSI C78.258 | PAR 46 BULB, MEDIUM SLIDE PRONG BASE, INCANDESCENT |
ANSI C78.259 | PAR 56 BULB MOGUL END PRONG BASE INCANDESCENT LAMP |
ANSI C78.262 | A-21 BULB, MEDIUM SCREW BASE INCANDESCENT LAMP |
ANSI C78.386 | MERCURY LAMPS - METHODS OF MEASURING CHARACTERISTICS |
ANSI C79.2 | NOMENCLATURE FOR MOLDED GLASS FLARES |
ANSI C8.22 | TESTING THERMO-SET INSULATED & JACKED WIRE & CABLE |
ANSI C8.25 | NATURAL RUBBER SHEATH FOR WIRE AND CABLE |
ANSI C8.26 | NATURAL RUBBER PERFORMANCE INSULATION WIRE/CABLE |
ANSI C8.27 | NATURAL RUBBER HEAT RESISTING INSULATION WIRE/CABL |
ANSI C8.29 | OZONE-RESISTING INSULATION FOR WIRE AND CABLE |
ANSI C8.34 | WEATHER-RESISTANT WIRE AND CABLE - NEOPRENE TYPE |
ANSI C8.35 | WEATHER-RESISTANT POLYOLEFIN-COVERED WIRE AND CABLE |
ANSI C8.36 | ASBESTOS/VARNISH CLOTH/THERMOPLASTIC INSULATD WIRE |
ANSI C8.47 | POLYOLEFIN-INSULATED THERMOPLASTIC-JACKETED CABLES |
ANSI C80.2 | RIGID STEEL CONDUIT ENAMELED |
ANSI C80.4 | FITTINGS FOR RIGID METAL CONDUIT & ELECTRICAL META |
ANSI C81.10 | ELECTRIC LAMP BASES AND HOLDERS - SCREW - SHELL |
ANSI C81.130 | RM51/GX5.3 & RM51/GY5.3 TWO-PIN REFECTOR BASE |
ANSI C81.131 | RM51/GX5.3 & RM51/GY5.3,2-PIN REFLECTOR HOLDER ) |
ANSI C81.20 | ELECTRIC LAMP BASES AND HOLDERS - FLUORESCENT TYPE |
ANSI C81.30 | ELECTRIC LAMP BASES AND HOLDERS - BAYONET AND PREF |
ANSI C81.40 | ELECTRIC LAMP BASES AND HOLDERS - BIPIN AND BIPOST |
ANSI C81.50 | ELECTRIC LAMP BASES AND HOLDERS-MISCELLANEOUS TYPE |
ANSI C83.1 | STANDARD COLORS FOR COLOR INDENTIFICATION & CODING |
ANSI C83.107 | ACCEPTABILITY OF PRINTED WIRING BOARDS |
ANSI C83.11 | METAL ENCASED FIXED DIELECTRIC CAPACITORS/DC APPLI |
ANSI C83.112 | X-REF IPC-L-109 |
ANSI C83.13 | WIRE-WOUND POWER-TYPE RHEOSTATS |
ANSI C83.14 | RIGID COAXIAL TRANSMISSION LINES 50 OHMS REQUIREME |
ANSI C83.16 | DEFINITIONS/TERMINOLOGY FOR RELAYS/ELECTRONIC EQUI |
ANSI C83.18 | FIXED WIREWOUND POWER RESISTORS |
ANSI C83.19 | X-REF TIA/EIA-200 |
ANSI C83.2 | PREFERRED VALVES |
ANSI C83.21 | SOLID & SEMI-SOLID DIELECTRIC TRANSMISSION LINES |
ANSI C83.22 | POLARIZED AL ELECTRLYTIC CAPACITORS TYPE 1 & 2 |
ANSI C83.24 | PIEZOELECTRICITY |
ANSI C83.25 | TESTING PROCEDURES FOR RELAYS |
ANSI C83.29 | FIXED PAPER & FIXED PAPER POLYESTER FLM DIELEC CAP |
ANSI C83.3 | TERMINOLOGY FOR PIEZOELECTRIC CRYSTALS |
ANSI C83.32 | PRECISION RESISTORS |
ANSI C83.37 | COLOR CODING OF CHASSIS WIRING |
ANSI C83.4 | CERAMIC DIELECTRIC CAPACITORS,CLASSES 1,2 & 3 |
ANSI C83.42 | VARISTOR DEFINITIONS & TEST METHODS |
ANSI C83.48 | FIXED COMPOSITION RESISTORS |
ANSI C83.54 | FEED-THRU RADIO INTERFERENCE CAPACITORS, FILM, |
ANSI C83.55 | REEL PACKAGE OF COMPONENTS WITH AXIAL LEADS |
ANSI C83.6 | LOW POWER,INSULTD FIXED WIREWOUND RESISTORS |
ANSI C83.60 | SOLDERABILITY OF PRINTED WIRING BOARDS |
ANSI C83.62 | EIA STANDARD METALLIZED DIELECTRIC CAPACITORS IN METALLIC AND NON-METALLIC CASES FOR DIRECT CURRENT APPLICATION |
ANSI C83.63 | STANDARD TEST PROCEDURE/LOW FREQUENCY ELECTRICAL- |
ANSI C83.65 | FOUR-CHANNEL SOUND MAGNETIC TAPE RECORDS |
ANSI C83.70 | FIXED FILM RESISTORS PRECISION & SEMI-PRECISION |
ANSI C83.72 | SOLDERLESS WRAPPED ELECTRICAL CONNECTIONS |
ANSI C83.74 | PRINTED WIRING DEFINITION & REGISTER |
ANSI C83.78 | ADHESION OF PRINTED WIRING, METHOD OF TEST |
ANSI C83.79 | TOOLS, CRIMPING, SOLDERLESS WIRING DEVICES, CRITER |
ANSI C83.81 | UNIT STANDARDS/CERAMIC BASED PRINTED CIRCUITS |
ANSI C83.82 | CERAMIC BASED PRINTED CIRCUITS |
ANSI C83.83 | DIMENSIONAL SYSTEMS FOR AUTOMATION |
ANSI C83.86 | CRITERIA FOR INSPECTION FOR HIGHLY RELIABLE SOLDERED CONNECTIONS IN ELECTRONIC AND ELECTICAL APPLICATIONS |
ANSI C83.88 | CONNCTORS, ELECTRICAL, PRINTED-WIRING BOARD |
ANSI C83.9 | RACKS,PANELS & ASSOCIATED EQUIPMENT |
ANSI C83.98 | PRINTED WIRING BOARD, DIMENSIONAL, SINGLE, 2 SIDED |
ANSI C85.1 | AMERICAN STANDARD TERMINOLOGY FOR AUTOMATION CONTROL |
ANSI C87.1 | ELECTRIC ARC-WELDING APPARATUS |
ANSI C89.1 | SPECIALTY TRANSFORMERS (EXCEPTANCE TYPE) |
ANSI C89.2 | DRY-TYPE TRANSFORMERS FOR GENERAL APPLICATIONS |
ANSI C9.100 | MAGNET WIRE |
ANSI C92.1 | FOR POWER SYSTEMS-INSULATION COORDINATION |
ANSI C93.2 | REQUIREMENTS FOR POWER-LINE COUPLING CAPACITOR VOL |
ANSI C93.4 | POWER - LINE CARRIER LINE - TUNING EQUIPMENT |
ANSI C95.4 | SAFETY GUIDE FOR THE PREVENTION OF RADIO FREQUENCY RADIATION HAZARDS IN THE USE OF ELECTRIC BLASTING CAPS |
ANSI C96.1 | TEMPERATURE MEASUREMENT THERMOCOUPLES |
ANSI C97.1 | LOW-VOLTAGE CARTRIDGE FUSES |
ANSI C98.1 | DIMENSIONS OF 2-IN VIDEO MAGNETIC RECORDING TAPE |
ANSI C98.11 | AUDIO OPERATING LEVEL, MULTIFREQUENCY, TEST TAPE |
ANSI C98.12 | TIME AND CONTROL CODE FOR VIDEO AND AUDIO TAPE FOR 525 LINE/60 FIELD TELEVISION SYSTEMS |
ANSI C98.13 | DIMENSIONS OF CARTRIDGE SPOOLS FOR 2-INCH QUADRUPLEX VIDEO MAGNETIC TAPE |
ANSI C98.14 | DIMENSIONS/PLASTIC REELS FOR 1/2"(12.7 MM)VIDEO |
ANSI C98.15M | BASIC SYSTEM PARAMETERS, 1 IN TYPE B, HELICAL-SCAN |
ANSI C98.16M | DIMENSIONS/LOCATION/RECORDS,1"TYPE B,HELICAL-SCAN |
ANSI C98.17M | FREQUENCY RESPONSE & OPERATING LEVEL 1-IN TYPE B- |
ANSI C98.18M | GEOMETRY PARA FOR 1-IN TYPE C HELICAL-SCAN VIDEO |
ANSI C98.19M | VIDEO RECORDING 1-IN TYPE C RECORDS |
ANSI C98.2 | MONOCHROME VIDEO MAGNETIC TAPE LEADER |
ANSI C98.20M | FREQUNCY RESPONSE, REFERENCE LEVEL OF RECORDERS- |
ANSI C98.21M | DIMENSIONS/LOCATION OF RECORDS 3/4" TYPE E, HELICL |
ANSI C98.22M | DIMENSIONS/VIDEO CASSETTE,3/4"TYPE E,HELICAL-SCAN |
ANSI C98.23M | DIMENSIONS/LOCATION OF RECORDERS, BASIC, ELECTRICA |
ANSI C98.3 | FREQUENCY OF RESPONSE IN OPERATING LEVEL RECORDERS |
ANSI C98.4 | VIDEO RECORDING 2-IN MAGNETIC TAPE FOR QUADRUPLEX |
ANSI C98.5 | DIMENSIONS OF 2" VIDEO MAGNETIC TAPE REELS |
ANSI C98.8 | SPECIFICATIONS/AUDIO OPERATING LEVEL/MULTIFREQUENC |
ANSI C98.9 | COLOR VIDEO MAGNETIC TAPE LEADER |
ANSI C99.1 | CRITERIA FOR INSPECTION FOR HIGHLY RELIABLE SOLDERED CONNECTIONS IN ELECTRONIC AND ELECTRICAL APPLICATIONS |
ANSI D10.1 | ADJUSTABLE FACE VEHICLE TRAFFIC CONTAINER SIGNAL- |
ANSI D14.1 | BOILING POINT OF ANTIFREEZES |
ANSI D14.3 | SPECIFIC GRAVITY/CONCENTRATION ENGINE ANTIFREEZES- |
ANSI D14.4 | AQUEOUS SOLUTIONS OF ENGINE ANTIFREEZES |
ANSI D14.5 | FREEZING POINT/AQUEOUS ENGINE ANTIFREEZE SOLUTION |
ANSI D14.6 | PH OF ENGINE ANTIFREEZEZ AND ANTIRUSTS |
ANSI D14.7 | ASH CONTENT OF ENGINE ANTIFREEZES/ANTIRUSTS |
ANSI D14.8 | HYDROMETER/THERM FIELD TESTER/ENGINE ANTIFREEZES |
ANSI D15.1 | METHOD/RECORDING, MEASURING FOR MOTOR VEHICLE FLEE |
ANSI D18.1 | TRAINING/AUTOMOTIVE MECHANICS FOR PASSENGER CARS, |
ANSI D18.2 | TRAINING OF AUTOMOTIVE MECHANICS FOR BUSES, HEAVY TRUCKS, AND TRUCK TRAILERS |
ANSI D18.3 | TRAINING/AUTOMOBILE BODY REPAIRMEN/AUTO-PAINTERS |
ANSI D18.4 | TRAINING/MOTOR VEHICLE INSPECTORS FOR PASSNGR.CARS |
ANSI D7.1 | INSPECTION MOTOR VEHICLES, TRAILERS, SEMITRAILERS |
ANSI D7.2 | STATION REQUIREMRNTS, INSPECTION, MOTOR VEHICLES- |
ANSI D7.3 | STATION REQUIREMENTS, INSPECTION, MOTOR VEHICLES- |
ANSI D7.4 | INSPECTION PROCEDURES FOR SCHOOL BUSES |
ANSI D7.5 | INSPECTION REQ/MOTORCYCLES (2 & 3 WHEEL VEHICLES) |
ANSI E38.1 | CARBON/ALLOY STEEL NUTS FOR BOLTS/HIGH PRESS/TEMP |
ANSI G24.11 | HOT ROLLED ALLOY STEEL BARS |
ANSI G24.12 | STEEL BARS, ALLOY, COLD-FINISHED |
ANSI G24.19 | QUENCHED/TEMPERATURE ALLOY STEEL BOLTS |
ANSI G24.2 | LOW & INTERMEDIATE TENSIL STRENGTH CARBONATED STEL |
ANSI G24.22 | HOT FORMED WELDED/SEEMLESS CARBONATED STEEL STRUCT |
ANSI G24.26 | HIGH YIELD STRENGTH QUENCHED/TEMPERATURE ALLOY STL |
ANSI G24.5 | HOT ROLLED AND COLD FINISHED CARBINATED ALLOY STEL |
ANSI G25.1 | GRAY IRON CASTINGS |
ANSI G31.2 | PIPING FITTING/WROUGHT CARBENATED STEEL MEDIUM & |
ANSI G34.1 | ALLOY STEEL |
ANSI G35.10 | CARBON STEEL |
ANSI G35.2 | LOW& INTERMEDIATE TENSILE STRGENGTH CARBON STEEL- |
ANSI G37.1 | FORGED/ROLLED ALLOY STEEL PIPE FLANGES |
ANSI G37.2 | STEEL CASINGS |
ANSI G37.8 | WROUGHT AUSTENITIC STAINLESS STEEL PIPING FITTINGS |
ANSI G38.1 | CARBON & ALLOY STEEL NUTS, BOLTS FOR HIGH-PRESSURE |
ANSI G38.10 | QUENCHED/TEMPERATURE ALLOY STEEL BOLTS, STUDS,- |
ANSI G38.4 | ALLOY STEEL, STAINLESS STEEL, BOLTING MATERIALS- |
ANSI G38.5 | LOW CARBON STEEL EXTERNAL/INTERNAL, THREADED |
ANSI G38.9 | FERRITIC STEEL CAST/PRESS CONNECTING PARTS, LOW-TE |
ANSI G41.5 | STRUCTURAL STEEL |
ANSI G41.6 | HIGH-STRGTH LOW-ALY COLUMBIUM-VANADIUM STEELS |
ANSI G45.1 | WELDED STEEL WIRE FABRIC/CONCRETE REINFORCEMENT |
ANSI G46.2 | FACTORY MADE WROUGHT CARBON, ALLOY STEEL, WELDING |
ANSI G47.1 | COLD ROLLED CARBON STEEL STRIP |
ANSI G48.1 | MALLEABLE IRON CASTING |
ANSI G52.2 | FERRITIC/AUSTENITIC STEEL CASTING/HIGH TEMPERATURE |
ANSI G52.3 | STEEL CASTING FOR HIGHWAY BRIDGES |
ANSI G53.10 | PREPARATION OF HIGH CARBON STEEL/ELECTROPLATING |
ANSI G53.16 | MEASURING IMPEDANCE/ANODIC COATINGS ON ALUMINUM |
ANSI G53.2 | ELECTRODEPOSITED COATINGS/CADMIUM ON STEEL |
ANSI G53.6 | CHROMIUM PLATING ON STEEL FOR ENGINEERING USE |
ANSI G54.12 | GENERAL REQ/WIRE RODS AND COARSE RND WIRE,CARB STL |
ANSI G54.2 | MUSIC STEEL SPRING WIRE |
ANSI G55.4 | CARBON AND ALLOY STEEL FRG/PRESS VESSL SHELLS |
ANSI G55.5 | ULTRASONIC TESTG & INSPECTN/TURBINE & GEN STL ROTO |
ANSI G55.9 | CARBON/ALLOY STEEL FORGINGS/TURBINE RTRS/SHFTS |
ANSI G56.1 | HIGH HARDENABILITY BEARING STEELS |
ANSI G58.1 | END-QUENCH TEST FOR HARDENABILITY OF STEEL |
ANSI G60.1 | MECHANICAL TESTING OF STEEL PRODUCTS |
ANSI G61.1 | ALLOY STEEL CHAIN |
ANSI G61.2 | CARBON STEEL CHAIN |
ANSI G61.5 | MACHINE AND COIL CHAIN |
ANSI G62.1 | X-REF ASTM A 511 |
ANSI G62.3 | ELECTRIC RESISTANCE WELDED CRBN/ALY STL MECH TUBNG |
ANSI G64.1 | WROUGHT ALLOY STEEL ROLLS FOR COLD/HOT REDUCTION |
ANSI G72.1 | MOLYBDENUM OXIDE PRODUCTS |
ANSI G8 | WEIGHT OF COATG ON ZINC-COATED IRON/STL ARTICLES |
ANSI G8.1 | ZINC COATINGS/PRODUCTS FABRICATED/ROLLER PRESSED |
ANSI G8.12 | WEIGHT OF COATING ON ZINC COATED IRON/STL ARTICLES |
ANSI G8.13 | SAFEGUARDING AGAINST EMBRITTLEMENT OF HOT-DIP GALA |
ANSI G8.14 | ZINC COATING (HOT DIPPED) ON IRON/STEEL HARDWARE |
ANSI G8.15 | WEIGHT AND COMPOSITION OF COATING ON LONG TERNE SH |
ANSI G8.25 | X-REF ASTM A 525 |
ANSI G81.16 | X-REF ASTM A 380 |
ANSI G81.19 | CHROMIUM NICKEL-IRON ALLY CASTING (25-12 CLASS) |
ANSI G81.23 | X-REF ASTM A 457 |
ANSI G81.29 | STAINLESS/HEAT RESISTANT STEEL BARS/SHAPES |
ANSI G81.30 | GEN REQ/DEL OF FLAT ROLLED STNLESS/HEAT REST PLATE |
ANSI G81.35 | X-REF ASTM A 518 |
ANSI G81.5 | X-REF ASTM A 262 |
ANSI GLOBAL ACTION REPORT | GLOBAL ACTION REPORT |
ANSI H23.1 | SEAMLESS COPPER WATER TUBE |
ANSI H23.3 | SEAMLESS COPPER TUBE |
ANSI H23.4 | GENERAL REQ/WRGHT SEAMLESS COPPER/COPPER ALY TUBE |
ANSI H23.6 | COPPER DRAINAGE TUBE (DWV) |
ANSI H27.1 | SEAMLESS RED BRASS PIPE STD SIZES |
ANSI H28.1 | BRONZE CASTINGS IN THE ROUGH/LOCOMOTIVE WEAR PARTS |
ANSI H29.1 | CAR & TENDER JOURNAL BEARINGS LINED |
ANSI H32.1 | BRASS WIRE |
ANSI H34.4 | NICKEL-CHROMIUM/IRON ALLOY ROD & BAR |
ANSI H34.7 | NICKEL ROD AND BAR |
ANSI H34.8 | NICKEL PLATE,SHEET, AND STRIP |
ANSI H36.1 | BRASS TUBE |
ANSI H38.10 | ALUMINUM-ALLOY STD STRUCTRL SHAPES,ROLLED/EXTRUDED |
ANSI H38.14 | CORROSION TESTING/DECOR CHROM PLATING BY CORRODKOT |
ANSI H38.16 | ALUMINUM-ALLOY EXTRUDED STRUCTURAL PIPE & TUBE |
ANSI H38.18 | ALUMINUM-ALY EXTRDED ROUND COILED TUBES/GENRL PURP |
ANSI H38.2 | ALUMINUM-ALLOY SHEET & PLATE |
ANSI H38.3 | ALUMINUM-ALLOY DRAWN SEAMLESS TUBES |
ANSI H38.4 | ALUMINUM-ALLOY BARS, RODS AND WIRE |
ANSI H38.5 | ALUMINUM-ALLOY EXTRUDED BARS, RODS, SHAPES & TUBES |
ANSI H38.7 | ALUMINUM-ALLOY SEAMLESS PIPE & SEAMLESS EXTRUDING- |
ANSI H45.7 | MAGNESIUM-ALLOY DIE CASTINGS |
ANSI H7.1 | COPPER & COPPER ALY FORGING ROD, BAR AND SHAPES |
ANSI H7.7 | COPPER BERYLLIUM ALLOY ROD & BAR |
ANSI H8.1 | FREE CUTTING BRASS ROD, BAR & SHAPES IN SCREW MACH |
ANSI H9.13 | GREEN STRENGTH OF COMPACTED METAL/POWDER SPECIMANS |
ANSI H9.7 | EVALUATING CEMENTED CARBIDES FOR APPARENT POROSITY |
ANSI IICRC S520 | STANDARD AND REFERENCE GUIDE FOR PROFESSIONAL MOLD REMEDIATION |
ANSI INCITS 100 | INFORMATION SYSTEMS - INTERFACE BETWEEN DATA TERMINAL EQUIPMENT (DTE) AND DATA CIRCUIT-TERMINATING EQUIPMENT (DCE) FOR OPERATION WITH PACKET-SWITCHED DATA NETWORKS (PSDN), OR BETWEEN TWO DTES, BY DEDICATED CIRCUIT |
ANSI INCITS 103 | INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE MINICASSETTE FOR INFORMATION INTERCHANGE, COPLANAR 3.81 MM (0.150 IN) |
ANSI INCITS 11 | GENERAL PURPOSE PAPER CARDS FOR INFORMATION PROCESSING |
ANSI INCITS 111 | INFORMATION SYSTEMS - OPTICAL CHARACTER RECOGNITION (OCR) - MATRIXCHARACTER SETS FOR OCR-MA |
ANSI INCITS 112 | INFORMATION SYSTEMS - MAGNETIC STORAGE DISKS WITH 14" (356-MM) DIAMETER AND LOW SURFACE FRICTION (160,000 FLUX TRANSITIONS PER TRACK, 480 TPI) - GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS |
ANSI INCITS 113 | INFORMATION SYSTEMS - PROGRAMMING LANGUAGES - MODULES AND INDIVIDUAL CHARACTER INPUT FOR FULL BASIC |
ANSI INCITS 115 | INFORMATION SYSTEMS - UNFORMATTED 80-MEGABYTE TRIDENT PACK FOR USEAT 370 TPI AND 6000 BPI - GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS |
ANSI INCITS 116 | INFORMATION SYSTEMS - RECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 4-TRACK, SERIAL, 0.250 INCH (6.30 MM), 6400 BPI (252 BPMM), INVERTED MODIFIED FREQUENCY MODULATION ENCODED |
ANSI INCITS 117 | INFORMATION SYSTEMS - TEXT AND FACSIMILE COMMUNICATION EQUIPMENT -PRINTALBE/IMAGE AREAS |
ANSI INCITS 118 | PERSONAL IDENTIFICATION NUMBER - PIN PAD |
ANSI INCITS 119 | INFORMATION SYSTEMS - CONTACT START-STOP STORAGE DISK - 158 361 FLUX TRANSITIONS PER TRACK 8.268-IN (210-MM) OUTER DIAMETER AND 3.937-IN (100-MM) INNER DIAMETER |
ANSI INCITS 120 | INFORMATION SYSTEMS - CONTACT START-STOP STORAGE DISK - 95 840 FLUX TRANSITIONS PER TRACK 7.874-IN (200-MM) OUTER DIAMETER AND 2.500-IN (63,5-MM) INNER DIAMETER |
ANSI INCITS 121 | INFORMATION SYSTEMS - TWO-SIDED, UNFORMATTED, 8-INCH (200-MM), 48-TPI, DOUBLE-DENSITY, FLEXIBLE, DISK CARTRIDGE - GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS FOR 13 262 FTPR TWO-HEADED APPLICATIONS |
ANSI INCITS 124 | INFORMATION SYSTEMS - COMPUTER GRAPHICS - GRAPHICAL KERNEL SYSTEM (GKS) FUNCTIONAL DESCRIPTION |
ANSI INCITS 124.1 | INFORMATION SYSTEMS - COMPUTER GRAPHICS - GRAPHICAL KERNEL SYSTEM (GKS) FORTRAN BINDING |
ANSI INCITS 124.2 | INFORMATION SYSTEMS-COMPUTER GRAPHICS-GRAPHICAL KERNEL SYSTEM (GKS) PASCAL BINDING |
ANSI INCITS 124.3 | INFORMATION SYSTEMS - COMPUTER GRAPHICS - GRAPHICAL KERNEL SYSTEM (GKS) ADA BINDING |
ANSI INCITS 125 | INFORMATION SYSTEMS - TWO-SIDED, DOUBLE-DENSITY, UNFORMATTED, 5.25 INCH (130-MM), 48-TPI (1,9-TPMM), FLEXIBLE DISK CARTRIDGE FOR 7958 BPR USE - GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS |
ANSI INCITS 126 | INFORMATION SYSTEMS - ONE- OR TWO-SIDED, DOUBLE-DENSITY, UNFORMATTED, 5.25-INCH (130-MM), 96-TPI (3,8 TPMM), FLEXIBLE DISK CARTRIDGE FOR 7958 BPR USE - GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS |
ANSI INCITS 127 | INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.250 INCH (6.30 MM), 6400-10,000 FTPI (252-394 FTPMM) |
ANSI INCITS 131 | INFORMATION SYSTEMS - SMALL COMPUTER SYSTEM INTERFACE-2 |
ANSI INCITS 135 | INFORMATION SYSTEMS - DATABASE LANGUAGE - SQL |
ANSI INCITS 135.10 | INFORMATION SYSTEMS - DATABASE LANGUAGES - SQL - PART 10: OBJECT LANGUAGE BINDINGS (SQL/OLB) |
ANSI INCITS 136 | INFORMATION SYSTEMS - SERIAL RECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 4 AND 9 TRACK, 0.250 INCH (6.30 MM), 8000 BPI (315 BPMM) STREAMING MODE, GROUP CODE RECORDING |
ANSI INCITS 137 | INFORMATION SYSTEMS-ONE-AND TWO-SIDED, UNFORMATTED, 90-MM (3.5-IN)5,3-TPMM (135-TPI) FLEXIBLE DISK CARTRIDGE FOR 7958 BPR USE- GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS |
ANSI INCITS 139 | INFORMATION SYSTEMS - FIBER DISTRIBUTED DATA INTERFACE (FDDI) TOKEN RING MEDIA ACCESS CONTROL (MAC) |
ANSI INCITS 14 | INFORMATION SYSTEMS - RECORDED MAGNETIC TAPE FOR INFORMATION INTERCHANGE (200 CPI, NRZI) |
ANSI INCITS 145 | INFORMATION SYSTEMS - CODES - IDENTIFICATION OF HYDROLOGIC UNITS |
ANSI INCITS 148 | INFORMATION SYSTEMS-FIBER DISTRIBUTED DATA INTERFACE (FDDI) TOKEN RING PHYSICAL LAYER PROTOCOL (PHY) |
ANSI INCITS 149 | FINANCIAL SERVICES - FINANCIAL TRANSACTION CARD FORMSETS - LOCATION OF IMPRINTED INFORMATION |
ANSI INCITS 150 | OFFICE MACHINES AND SUPPLIES - BUSINESS MACHINES, DATA PROCESSING EQUIPMENT, AND BUSINESS FORMS - CHARACTER AND LINE SPACING |
ANSI INCITS 151 | OFFICE MACHINES AND SUPPIES - BUSINESS MACHINES, DATA PROCESSING EQUIPMENT, AND BUSINESS FORMS - CHARACTER AND LINE SPACING |
ANSI INCITS 152 | OFFICE MACHINES AND SUPPLIES - NONCARBONIZED, SINGLE-PLY ADDING MACHINE PAPER ROLLS - SPECIFICATIONS |
ANSI INCITS 154 | OFFICE MACHINES AND SUPPLIES - ALPHANUMERIC MACHINES - KEYBOARD ARRANGEMENT |
ANSI INCITS 157 | INFORMATION SYSTEMS - RECORDED MAGNETIC TAPE FOR INFORMATION INTERCHANGE - 3200 CPI (126 CPMM), PHASE ENCODED |
ANSI INCITS 158 | INFORMATION SYSTEMS - RECORDED MAGNETIC TAPE CASSETTE FOR INFORMATION INTERCHANGE - 4 TRACK, 0.150 INCH (3.81 MM), 8000 BPI (315 BPMM), GROUP CODE RECORDING |
ANSI INCITS 162 | TWO-SIDED, HIGH-DENSITY, UNFORMATTED, 5.25-INCH (130-MM), 96-TPI (3,8 TPMM), FLEXIBLE DISK CARTRIDGE FOR 13 262 FTPR USE - GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS |
ANSI INCITS 163 | INFORMATION SYSTEMS-CONTACT START-STOP METALLIC FILM STORAGE DISK 83 333 FLUX TRANSITIONS PER TRACK 130-MM (5.118-IN) OUTER DIAMETERAND 40-MM (1.575-IN) INNER DIAMETER |
ANSI INCITS 164 | UNRECORDED MAGNETIC TAPE CASSETTE FOR INFORMATION INTERCHANGE, 3.81 MM (0.150 IN) TAPE, 394 FTPMM (10 000 FTPI) - PHYSICAL AND MAGNETIC INTERCHANGEABILITY REQUIREMENTS |
ANSI INCITS 165 | INFORMATION SYSTEMS - PROGRAMMING LANGUAGE DIBOL |
ANSI INCITS 166 | INFORMATION SYSTEMS - FIBRE DATA DISTRIBUTED INTERFACE (FDDI) - TOKEN RING PHYSICAL LAYER MEDIUM DEPENDENT (PDM) |
ANSI INCITS 17 | CHARACTER SET FOR OPTICAL CHARACTER RECOGNITION (OCR-S) |
ANSI INCITS 171 | INFORMATION SYSTEMS - ONE- AND TWO-SIDED, HIGH-DENSITY, UNFORMATTED, 90-MM (3.5 IN), 5,3-TPMM (135-TPI), FLEXIBLE DISK CARTRIDGE FOR 15 916 BPR USE - GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS |
ANSI INCITS 172 | INFORMATION TECHNOLOGY - AMERICAN NATIONAL STANDARD DICTIONARY OF INFORMATION TECHNOLOGY (ANSDIT) |
ANSI INCITS 175 | INFORMATION TECHNOLOGY - 19-MM TYPE ID-1 RECORDED INSTRUMENTATION DIGITAL CASSETTE TAPE FORMAT |
ANSI INCITS 178 | INFORMATION SYSTEMS - SUPPLEMENT TO PACKET-SWITCHED SIGNALING SYSTEMS BETWEEN PUBLIC NETWORKS PROVIDING DATA TRANSMISSION SERVICES (NUI UTILITY EXTENSIONS AND FORMAT CONSTRAINTS) |
ANSI INCITS 179 | CONTACT START-STOP METALLIC THIN-FILM STORAGE DISK - 83 333 FLUX TRANSITIONS PER TRACK 95-MM (3.740-IN) OUTER DIAMETER AND 25-MM (09.984-IN) INNER DIAMETER AND 1.27-MM (0.050-IN) THICKNESS |
ANSI INCITS 18 | ONE-INCH PERFORATED PAPER TAPE - INFORMATION INTERCHANGE |
ANSI INCITS 180 | MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INFORMATION INTERCHANGE - 18-TRACK, PARALLEL, 1/2 INCH (12.65 MM), 37 871 CPI (1491 CPMM), GROUND-CODED - REQUIREMENTS FOR RECORDING |
ANSI INCITS 181 | RECORDED MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - 112 INCH (12.65 MM), SERIAL SERPENTINE, 22-TRACK, 6 667 BPI (262 BPMM), AND 48-TRACK, 10 000 BPI (394 BPMM), MFM-ENCODED - REQUIREMENTS FOR RECORDING |
ANSI INCITS 182 | INFORMATION SYSTEMS - BAR CODE PRINT QUALITY - GUIDELINE |
ANSI INCITS 183 | INFORMATION SYSTEMS - HIGH-PERFORMANCE PARALLEL INTERFACE - MECHANICAL, ELECTRICAL, AND SIGNALLING PROTOCOL SPECIFICATION (HIPPI-PH) |
ANSI INCITS 184 | INFORMATION SYSTEMS - FIBER-DISTRIBUTED DATA INTERFACE (FDDI) SINGLE-MODE FIBER PHYSICAL LAYER MEDIUM DEPENDENT (SMF-PMD) |
ANSI INCITS 186 | INFORMATION SYSTEMS - FIBER DISTRIBUTED DATA INTERFACE (FDDI) - HYBRID RING CONTROL (HRC) |
ANSI INCITS 187 | INFORMATION SYSTEMS - RECORDED MAGNETIC TAPE FOR LONGITUDINAL RECORDING OF INSTRUMENTATION DATA - INTERCHANGE |
ANSI INCITS 189 | INFORMATION SYSTEMS - INTERFACE BETWEEN DATA TERMINAL EQUIPMENT (DTE) AND DATA CIRCUIT-TERMINATING EQUIPMENT (DCE) FOR TERMINALS OPERATING IN THE PACKET MODE AND ACCESSING PUBLIC DATA NETWORK THROUGH SWITCHED ACCESS |
ANSI INCITS 19 | ELEVEN-SIXTEENTHS INCH PEFORATED PAPER TAPE FOR INFORMATION INTERCHANGE |
ANSI INCITS 190 | INFORMATION TECHNOLOGY - TEXT AND OFFICE SYSTEMS - CONFORMANCE TESTING FOR STANDARD GENERALIZED MARKUP LANGUAGE (SGML) SYSTEMS |
ANSI INCITS 191 | INFORMATION SYSTEMS - RECORDED OPTICAL MEDIA UNIT FOR DIGITAL INFORMATION INTERCHANGE - 130 MM WRITE-ONCE SAMPLED-SERVO RZ SELECTABLE-PITCH OPTICAL DISK CARTRIDGE |
ANSI INCITS 197 | INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE 1/2 IN (12.65 MM) SERIAL SERPERTINE 22-TRACK 6667 FTPI (262 FTPMM) AND 48 TRACK 10, 000 FTPI (394 FTPMM) |
ANSI INCITS 198 | PROGRAMMING LANGUAGE - FORTRAN - EXTENDED |
ANSI INCITS 199 | INFORMATION SYSTEMS - 356-MM OPTICAL DISK CARTRIDGE (WRITE-ONCE) -TEST METHODS FOR MEDIA CHARACTERISTICS |
ANSI INCITS 20 | TAKE-UP REELS FOR ONE-INCH PERFORATED TAPE FOR INFORMATION INTERCHANGE |
ANSI INCITS 200 | INFORMATION SYSTEMS - UNRECORDED OPTICAL MEDIA UNIT FOR DIGITAL INFORMATION INTERCHANGE - 356-MM WORM OPTICAL DISK CARTRIDGE (PART1 AND 2) |
ANSI INCITS 203 | INFORMATION SYSTEMS - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGEFOR INFORMATION INTERCHANGE (3.81 -MM (0.150-IN) DIGITAL DATA STORAGE (DDS) RECORDED FORMAT) |
ANSI INCITS 204 | INFORMATION SYSTEMS - RECORDED MAGNETIC TAPE FOR INFORMATION INTERCHANGE 1.5 AND 18 TRACK, 0.250-INCH (6.35-MM) 10 000 BPI (394BPMM) STREAMING MODE, GROUP CODE RECORDING |
ANSI INCITS 205 | INFORMATION SYSTEMS - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGEFOR INFORMATION INTERCHANGE (3.81 MM (0.150-IN) DATA/DAT RECORDED FORMAT) |
ANSI INCITS 207 | OFFICE MACHINES AND SUPPLIES - ALPHANUMERIC MACHINES - ALTERNATE KEYBOARD ARRANGEMENT |
ANSI INCITS 209 | INFORMATION SYSTEMS - OPTICAL CHARACTER RECOGNITION (OCR) - MATRIXCHARACTER SETS FOR OCR-MB |
ANSI INCITS 21 | RECTANGULAR HOLES IN TWELVE-ROW PUNCHED CARDS |
ANSI INCITS 210 | INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - FRAMING PROTOCOL (HIPPI-FP) |
ANSI INCITS 211 | INFORMATION SYSTEMS - 130-MM WRITE-ONCE OPTICAL DISK CARTRIDGE USING CONTINUOUS SERVO RLL 2,7 ENCODING AND LDC |
ANSI INCITS 212 | INFORMATION SYSTEMS - 130-MM REWRITABLE OPTICAL DISK CARTRIDGE FORINFORMATION INTERCHANGE |
ANSI INCITS 213 | INFORMATION TECHNOLOGY - 90-MM (3.54-IN) OPTICAL DISK CARTRIDGE REWRITABLE AND READ ONLY USING DISCRETE BLOCK FORMAT (DBF) METHOD FOR DIGITAL INFORMATION INTERCHANGE |
ANSI INCITS 214 | INFORMATION SYSTEMS - 130-MM WRITE-ONCE OPTICAL DISK CARTRIDGE USING SAMPLED SERVO AND 4/15 ENCODING |
ANSI INCITS 215 | INFORMATION SYSTEMS - PROGRAMMING LANGUAGES - FORTH |
ANSI INCITS 218 | INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - ENCAPSULATION OF ISO/IEC 8802-2 (IEEE STD 802.2) LOGICAL LINK CONTROL PROTOCOL DATA UNITS (HIPPI-LE) |
