Popular Standards |
|
ANSI A37.136 | CONCRETE JOINT SEALER/HOT-POURED ELASTIC TYPE |
ANSI A37.14 | SIEVE ANALYSIS OF MINERAL FILLER |
ANSI A37.17 | MAKING, CURING COMPRESSIVE CONCRETE, FLEX STIR, TE |
ANSI A37.18 | COMPRESSIVE STRENGTH CYLINDRICAL CONCRETE SPECIMEN |
ANSI A37.29 | SLUMP OF PORTLAND CEMENT CONCRETE |
ANSI A37.3 | BITUMEN |
ANSI A37.33 | STANDARD DEFINITION OF TERMS, RELATING MATERIALS F |
ANSI A37.43 | BITUMINOUS MIXING PLANT INSPECTION |
ANSI A37.44 | SAMPLING AND TESTING CALCIUM CHLORIDE |
ANSI A37.48 | ASPHALT PLANK |
ANSI A37.50 | MOISTURE-DENSITY RELATIONS OF SOIL-CEMENT MIXTURES |
ANSI A37.51 | WETTING/DRYING TESTS OF COMPACTED SOIL-CEMENT MIX |
ANSI A37.52 | FREEZING/THAWING TEST OF COMPACTED SOIL-CEMENT MIX |
ANSI A37.56 | SODIUM CHLORIDE |
ANSI A37.58 | CEMENT CONTENT OF SOIL CEMENT MIXTURES |
ANSI A37.59 | SULFONATION INDEX OF ROAD TARS |
ANSI A37.71 | SPECIFIC GRAVITY OF ROAD OILS-TARS-CEMENT-SOFT TAR |
ANSI A37.72 | SPECIFIC GRAVITY ASPHALTS/TAR PITCHES/SOLID/HANDLD |
ANSI A37.75 | SAMPLNG STONE/SLAG GRAVEL/SAND/STONE BLOCK/USE HWY |
ANSI A37.9 | DISTILLATION OF TARS AND TAR PRODUCTS |
ANSI A37.97 | ROAD TAR |
ANSI A38.1 | STEEL SPIRALS FOR ROUND REINFORCED CONCRETE COLUMN |
ANSI A40.4 | AIR GAPS/BACKFLOW PREVENTER/PLUMBING SYSTEMS |
ANSI A41.1 | BUILDING CODE REQUIREMENTS FOR MASONRY |
ANSI A41.2 | BUILDING CODE REQUIREMENTS FOR REINFORCED MASONRY |
ANSI A42.1 | GYPSUM PLASTERING |
ANSI A42.2 | PORTLAND CEMENT AND PORTLAND CEMENT-LIME PLASTERING, EXTERIOR (STUCCO) AND INTERIOR, A42.2-1971; LATHING AND FURRING FOR PORTLAND CEMENT AND PORTLAND CEMENT-LIME PLASTERING, EXTERIOR (STUCCO) AND INTERIOR, A42.3-1971 |
ANSI A48.1 | FORMS FOR ONE-WAY CONCRETE JOIST CONSTRUCTION |
ANSI A48.2 | FORMS, TWO-WAY CONCRETE JOIST CONSTRUCTION |
ANSI A50.3 | COLD-DRAWN STEEL WIRE FOR CONCRETE REINFORCEMENT |
ANSI A52.1 | CHIMNEYS FIREPLACE VENTING SYSTEMS |
ANSI A53.1 | LIGHT AND VENTILATION |
ANSI A54.1 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
ANSI A54.2 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
ANSI A54.3 | INSTALLATION OF SPRINKLER SYSTEMS |
ANSI A54.4 | FIRE FIGHTING EQUIPMENT |
ANSI A54.5 | FIRE EXTINGUISHING SYSTEMS |
ANSI A54.8 | AUTOMOTIVE FIRE APPARATUS |
ANSI A56.1 | BUILDING CODE REQUIREMENTS FOR EXCAVATIONS AND FOUNDATIONS |
ANSI A58.1 | MINIUM DESIGN LOAD IN BUILDINGS & OTHER STRUCTURES |
ANSI INCITS 345 | MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 98214 BPI (3866 BPMM) DLT6 FORMAT |
ANSI INCITS 346 | PROTECTED AREA RUN TIME INTERFACE EXTENSION SERVICES (PARTIES) |
ANSI INCITS 347 | BIOS ENHANCED DISK DRIVE SERVICES |
ANSI INCITS 348 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - GENERIC SERVICES - 3 (FC-GS-3) |
ANSI INCITS 349 | FIBRE CHANNEL - SINGLE-BYTE COMMAND CODE SETS MAPPING PROTOCOL -2 (FC-SB-2) |
ANSI INCITS 350 | INFORMATION TECHNOLOGY - FIBRE CHANNEL PROTOCOL FOR SCSI, SECOND VERSION (FCP-2) |
ANSI INCITS 351 | SCSI PRIMARY COMMANDS - 2 (SPC-2) |
ANSI INCITS 352 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACES (FC-PI) |
ANSI INCITS 353 | DEVELOPMENT WORK CONDUCTED IN L1 - GEOGRAPHIC INFORMATION SYSTEMS (GIS) **SEE ALSO INCITS 353** ***SEND CUSTOMER DIRECT FOR ZIP FILE FORMAT*** |
ANSI INCITS 354 | COMMON INDUSTRY FORMAT FOR USABILITY TEST REPORTS |
ANSI INCITS 355 | FIBRE CHANNEL - SWITCH FABRIC - 2 (FC-SW-2) |
ANSI INCITS 356 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - AUDIO VIDEO (FC-AV) |
ANSI INCITS 357 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - VIRTUAL INTERFACE ARCHITECTURE MAPPING PROTOCOL (FC-VI) |
ANSI INCITS 358 | INFORMATION TECHNOLOGY - BIOAPI SPECIFICATION - |
ANSI INCITS 359 | INFORMATION TECHNOLOGY - ROLE BASED ACCESS CONTROL |
ANSI INCITS 360 | INFORMATION TECHNOLOGY - SCSI MULTIMEDIA COMMANDS - 3 (MMC-3) |
ANSI INCITS 361 | INFORMATION TECHNOLOGY - AT ATTACHMENT WITH PACKET INTERFACE - 6 (ATA/ATAPI-6) |
ANSI INCITS 362 | INFORMATION TECHNOLOGY - SCSI PARALLEL INTERFACE-4 (SPI-4) - |
ANSI INCITS 363 | INFORMATION TECHNOLOGY - BIOS ENHANCED DISK DRIVE SERVICES - 2 |
ANSI INCITS 364 | INFORMATION TECHNOLOGY - FIBRE CHANNEL 10 GIGABIT (10GRFC) |
ANSI INCITS 365 | INFORMATION TECHNOLOGY - SCSI RDMA PROTOCOL (SRP) |
ANSI INCITS 366 | INFORMATION TECHNOLOGY - SCSI ARCHITECTURE MODEL - 2 (SAM-2) |
ANSI INCITS 367 | INFORMATION TECHNOLOGY - SCSI PARALLEL INTERFACE-5 (SPI-5) |
ANSI INCITS 368 | INFORMATION TECHNOLOGY - PARALLEL INTERCONNECT PERFORMANCE (PIP) |
ANSI INCITS 369 | INFORMATION TECHNOLOGY - SCSI SIGNAL MODELING-2 (SSM-2) |
ANSI INCITS 37 | INFORMATION TECHNOLOGY - PROGRAMMING LANGUAGE APT: PROCESSOR INPUT LANGUAGE AND SYSTEM-NEUTRAL CLFILE |
ANSI INCITS 370 | INFORMATION TECHNOLOGY - ATA/ATAPI HOST ADAPTERS STANDARD (ATA - ADAPTER) |
ANSI INCITS 371.1 | INFORMATION TECHNOLOGY - REAL TIME LOCATING SYSTEMS (RTLS) - PART 1: 2.4 GHZ AIR INTERFACE PROTOCOL |
ANSI INCITS 371.2 | INFORMATION TECHNOLOGY - REAL TIME LOCATING SYSTEMS (RTLS) - PART 2: 433 MHZ AIR INTERFACE PROTOCOL |
ANSI INCITS 371.3 | INFORMATION TECHNOLOGY - REAL TIME LOCATING SYSTEMS (RTLS) - PART 3: APPLICATION PROGRAMMING INTERFACE |
ANSI INCITS 372 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - BACKBONE (FC-BB-2) |
ANSI INCITS 373 | FOR INFORMATION TECHNOLOGY - FIBRE CHANNEL - FRAMING AND SIGNALLING (FC-FS) |
ANSI INCITS 374 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - SINGLE-BYTE COMMAND CODE SET MAPPING PROTOCOL - 3 (FC-SB-3) |
ANSI INCITS 375 | INFORMATION TECHNOLOGY - SERIAL BUS PROTOCOL (SBP-3) |
ANSI INCITS 376 | INFORMATION TECHNOLOGY - SERIAL ATTACHED SCSI (SAS) |
ANSI INCITS 377 | INFORMATION TECHNOLOGY - FINGER PATTERN DATA INTERCHANGE FORMAT |
ANSI INCITS 378 | INFORMATION TECHNOLOGY - FINGER MINUTIAE FORMAT FOR DATA INTERCHANGE |
ANSI INCITS 379 | INFORMATION TECHNOLOGY - IRIS IMAGE INTERCHANGE FORMAT |
ANSI INCITS 38 | IDENTIFICATION OF STATES, THE DISTRICT OF COLUMBIA, AND THE OUTLYIG AND ASSOCIATED AREAS OF THE UNITED STATES FOR INFORMATION INTERCHANGE-INFORMATION SYSTEMS-CODES |
ANSI INCITS 380 | INFORMATION TECHNOLOGY - SCSI STREAM COMMANDS - 2 (SSC-2) |
ANSI P3.6 | ANALYSIS OF SODA & SULPHATE WHITE & GREEN LIQUORS |
ANSI PATENT POLICY | GUIDELINES FOR IMPLEMENTATION OF THE ANSI PATENT POLICY |
ANSI PH1.1 | DESIGNATION/THICKNESS OF PHOTOGRAPHIC PAPER |
ANSI PH1.10 | DIMENSIONS/UNPERFORATED/PERFORATED PHOTOGRAPHIC FI |
ANSI PH1.11 | DIMENSIONS FOR PHOTOGRAPHIC ROLL PAPER |
ANSI PH1.12 | DIMENSIONS/PHOTOGRAPHIC SHEET PAPER |
ANSI PH1.13 | DIMENSIONS FOR PHOTOGRAPHY (FILM) PLASTIC, WOOD, OR METAL CORES - DIMENSIONS |
ANSI PH1.14 | 135-SIZE FILM MAGAZINES AND FILM FOR 135-SIZE STILL-PICTURE CAMERAS - DIMENSIONS |
ANSI PH1.14M | DIMENSIONS FOR 135 SIZE STILL PICTURE CAMERA |
ANSI PH1.15 | INDUSTRIAL RADIOGRAPHIC SHEET & ROLL FILMS-DIMENSI |
ANSI PH1.16 | GRAPHIC ARTS AND SHEET AND ROLL FILMS - DIMENSIONS |
ANSI PH1.17 | MEDICAL RADIOGRAPHIC SHEET AND ROLL FILMS - DIMENSIONS |
ANSI PH1.18 | PROFESSIONAL SHEET AND ROLL FILMS - DIMENSIONS |
ANSI PH1.19 | PHOTOGRAPHIC SHEET FILMS - DESIGNATION OF EMULSION |
ANSI PH1.2 | DIMENSIONS OF AERIAL FILM SPOOLS |
ANSI PH1.20 | DIMENSIONS/UPERFORATED/PERFORATED PHOTOGRAPHIC FIL |
ANSI PH1.21 | PHOTOGRAPHY (FILM) ROLL FILM SIZES 120 & 220 - DIMENSIONS |
ANSI PH1.23 | PHOTOGRAPHIC DRY (GLASS) PLATES-DIMENSIONS |
ANSI PH1.25 | SAFETY PHOTOGRAPHIC FILM, SPECIFICATIONS FOR |
ANSI PH1.27 | PHOTOGRAPHY (PAPERS) RECORDING INSTRUMENTS SPOOLIN |
ANSI PH1.28 | PHOTOGRAPHIC FILM/ARCHIVAL RECORDS, SILVER-GELATI |
ANSI PH1.29 | PHOTOGRAPHY (FILM) METHODS FOR DETERMINING CURL |
ANSI PH1.30 | FILM IN ROLLS FOR RECORDING INSTRUMENTS AND MISCELLANEOUS USES - DIMENSIONS |
ANSI PH1.31 | BRITTLENESS OF PHOTOGRAPHIC FILM, DETERMINING METH |
ANSI PH1.32 | DIMENSIONAL CHGANGE CHARACTERISTIC PHOTOGRAPH FILM |
ANSI PH1.33 | PHOTOGRAPHY (FILM) 16MM, 35MM, 70MM, AND 105MM SPOOLS FOR STILL-PICTURE CAMERAS - DIMENSIONS |
ANSI PH1.37 | SCRATCH RESISTANCE/PROCESSED PHOTOGRAPHIC FILM |
ANSI PH1.38 | DIMENSIONS/SIZE 220 ROLL FILM W/PAPER LEADER TRALR |
ANSI PH1.39 | DIMENSIONS/70MM FILM MAGAZINES/FILM STILL PICTURE |
ANSI PH1.40 | DIMENSIONS/126-SIZE CARTRIDGES FILM/BACKING PAPER |
ANSI PH1.41 | PHOTOGRAPHIC FILM/ARCHIVAL RECORDS SILVER GEL TYPE |
ANSI PH1.42 | METHOD/COMPARNG.COLOR STABILITIES OF PHOTOGRAPHS |
ANSI PH1.43 | PROCESSED SAFETY FILM-STORAGE FOR PHOTOGRAPHY FILM |
ANSI PH1.44 | ROLLS FOR PHOTOTYPESETTING OR PHOTOCOMPOSING DEVICES, OR BOTH - DIMENSIONS |
ANSI PH1.45 | PRACTICE/STORAGE OF PROCESSED PHOTOGRAPHIC PLATES |
ANSI PH1.46 | DIMENSIONS/CONTAINERS FOR PACKAGNG/STORAGE AERIAL |
ANSI PH1.47 | METHODS FOR DETECTING/DEGREE OF LUBRICATION/FILM |
ANSI PH1.48 | PRACTICE/STORAGE BLACK-WHITE PHOTOGRAPHIC PAPER |
ANSI PH1.49 | MEDICAL RADIOGRAPHIC FILM CASSETTES - DIMENSIONS |
ANSI PH1.50 | RADIOGRAPHIC FILM CASSETTE INTENSIFYING SCREENS-DI |
INCITS/ISO/IEC 15898 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 356 MM OPTICAL DISK CARTRIDGES - WORM, USING PHASE CHANGE TECHNOLOGY - CAPACITY: 14,8 GBYTES AND 25 GBYTES PER CARTRIDGE |
INCITS/ISO/IEC 15938-1 | INFORMATION TECHNOLOGY - MULTIMEDIA CONTENT DESCRIPTION INTERFACE - PART 1: SYSTEMS |
INCITS/ISO/IEC 15938-2 | INFORMATION TECHNOLOGY - MULTIMEDIA CONTENT DESCRIPTION INTERFACE - PART 2: DESCRIPTION DEFINITION LANGUAGE |
INCITS/ISO/IEC 15938-3 | INFORMATION TECHNOLOGY - MULTIMEDIA CONTENT DESCRIPTION INTERFACE - PART 3: VISUAL |
INCITS/ISO/IEC 15938-4 | INFORMATION TECHNOLOGY - MULTIMEDIA CONTENT DESCRIPTION INTERFACE - PART 4: AUDIO |
INCITS/ISO/IEC 15938-5 | INFORMATION TECHNOLOGY - MULTIMEDIA CONTENT DESCRIPTION INTERFACE - PART 5: MULTIMEDIA DESCRIPTION SCHEMES |
INCITS/ISO/IEC 15938-6 | INFORMATION TECHNOLOGY - MULTIMEDIA CONTENT DESCRIPTION INTERFACE - PART 6: REFERENCE SOFTWARE |
INCITS/ISO/IEC 15945 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SPECIFICATION OF TTP SERVICES TO SUPPORT THE APPLICATION OF DIGITAL SIGNATURES |
INCITS/ISO/IEC 15946-1 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CRYPTOGRAPHIC TECHNIQUES BASED ON ELLIPTIC CURVES - PART 1: GENERAL |
INCITS/ISO/IEC 15946-2 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CRYPTOGRAPHIC TECHNIQUES BASED ON ELLIPTIC CURVES - PART 2: DIGITAL SIGNATURES |
INCITS/ISO/IEC 15946-3 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CRYPTOGRAPHIC TECHNIQUES BASED ON ELLIPTIC CURVES - PART 3: KEY ESTABLISHMENT |
INCITS/ISO/IEC 16262 | INFORMATION TECHNOLOGY - ECMASCRIPT LANGUAGE SPECIFICATION |
INCITS/ISO/IEC 16448 | INFORMATION TECHNOLOGY - 120 MM DVD - READ-ONLY DISK |
INCITS/ISO/IEC 16449 | INFORMATION TECHNOLOGY - 80 MM DVD - READ-ONLY DISK |
INCITS/ISO/IEC 16485 | INFORMATION TECHNOLOGY - MIXED RASTER CONTENT (MRC) |
INCITS/ISO/IEC 17341 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 120 MM AND 80 MM OPTICAL DISK USING +RW FORMAT - CAPACITY: 4.7 GBYTES AND 1,46 GBYTES PER SIDE (RECORDING SPEED UP TO 16X) |
INCITS/ISO/IEC 17344 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 120 MM AND 80 MM OPTICAL DISK USING +R FORMAT - CAPACITY: 4.7 GBYTES AND 1,46 GBYTES PER SIDE (RECORDING SPEED UP TO 16X) |
INCITS/ISO/IEC 17345 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 130 MM REWRITABLE AND WRITE ONCE READ MANY ULTRA DENSITY OPTICAL (UDO) DISK CARTRIDGES - CAPACITY: 30 GBYTES PER CARTRIDGE - FIRST GENERATION |
INCITS/ISO/IEC 17462 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT |
INCITS/ISO/IEC 17799 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION SECURITY MANAGEMENT |
INCITS/ISO/IEC 18013-1 | INFORMATION TECHNOLOGY - PERSONAL IDENTIFICATION - ISO - COMPLIANT DRIVING LICENCE - PART 1: PHYSICAL CHARACTERISTICS AND BASIC DATA SET |
INCITS/ISO/IEC 18014-1 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - TIME-STAMPING SERVICES - PART 1: FRAMEWORK |
INCITS/ISO/IEC 18014-2 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - TIME-STAMPING SERVICES - PART 2: MECHANISMS PRODUCING INDEPENDENT TOKENS |
INCITS/ISO/IEC 18014-3 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - TIME-STAMPING SERVICES - PART 3: MECHANISMS PRODUCING LINKED TOKENS |
INCITS/ISO/IEC 18028-4 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - IT NETWORK SECURITY - PART 4: SECURING REMOTE ACCESS |
INCITS/ISO/IEC 18032 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - PRIME NUMBER GENERATION |
INCITS/ISO/IEC 18033-1 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - ENCRYPTION ALGORITHMS - PART 1: GENERAL |
INCITS/ISO/IEC 18033-3 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - ENCRYPTION ALGORITHMS - PART 3: STREAM CIPHERS |
INCITS/ISO/IEC 18035 | INFORMATION TECHNOLOGY - ICON SYMBOLS AND FUNCTIONS FOR CONTROLLING MULTIMEDIA SOFTWARE APPLICATIONS |
INCITS/ISO/IEC 18093 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 130 MM OPTICAL DISK CARTRIDGES OF TYPE WORM (WRITE ONCE READ MANY) USING IRREVERSIBLE EFFECTS - CAPACITY: 5,2 GBYTES PER CARTRIDGE |
INCITS/ISO/IEC 18809 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-1 WITH MIC FORMAT |
INCITS/ISO/IEC 18810 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT |
INCITS/ISO/IEC 18836 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - MAMMOTHTAPE-2 FORMAT |
INCITS/ISO/IEC 19118 | GEOGRAPHIC INFORMATION - ENCODING |
INCITS/ISO/IEC 19123 | GEOGRAPHIC INFORMATION - SCHEMA FOR COVERAGE GEOMETRY AND FUNCTIONS |
INCITS/ISO/IEC 19137 | GEOGRAPHIC INFORMATION - CORE PROFILE OF THE SPATIAL SCHEMA |
INCITS/ISO/IEC 19763-1 | INFORMATION TECHNOLOGY - METAMODEL FRAMEWORK FOR INTEROPERABILITY (MFI) - PART 1: REFERENCE MODEL |
INCITS/ISO/IEC 19763-3 | INFORMATION TECHNOLOGY - METAMODEL FRAMEWORK FOR INTEROPERABILITY (MFI) - PART 3: METAMODEL FOR ONTOLOGY REGISTRATION **NATIONAL ISO ADOPTION** |
INCITS/ISO/IEC 19784-1 | INFORMATION TECHNOLOGY - BIOMETRIC APPLICATION PROGRAMMING INTERFACE - PART 1: BIOAPI SPECIFICATION |
INCITS/ISO/IEC 19794-1 | INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 1: FRAMEWORK |
ANSI INCITS 412 | FOR INFORMATION TECHNOLOGY - SNIA MULTIPATH MANAGEMENT API SPECIFICATION |
ANSI INCITS 413 | INFORMATION TECHNOLOGY - RAPIDIO (TM) INTERCONNECT SPECIFICATION |
ANSI INCITS 414 | FOR INFORMATION TECHNOLOGY - FIBRE CHANNEL BACKBONE - 3 (FC-BB-3) |
ANSI INCITS 415 | FOR INFORMATION TECHNOLOGY - HOMELAND SECURITY MAPPING STANDARD - POINT SYMBOLOGY FOR EMERGENCY MANAGEMENT |
ANSI INCITS 416 | FOR INFORMATION TECHNOLOGY - FIBRE CHANNEL PROTOCOL FOR SCSI, THIRD VERSION (FCP-3) |
ANSI INCITS 417 | FOR INFORMATION TECHNOLOGY - SERIAL ATTACHED SCSI - 1.1 (SAS-1.1) |
ANSI INCITS 418 | FOR INFORMATION TECHNOLOGY - FIBRE CHANNEL - SWITCH FABRIC-4 (FC-SW-4) |
ANSI INCITS 419 | INFORMATION TECHNOLOGY - FIBRE CHANNEL BACKBONE - 4 (FC-BB-4) DEVELOPMENT WORK CONDUCTED IN T11, FIBRE CHANNEL INTERFACES |
ANSI INCITS 421 | FOR INFORMATION TECHNOLOGY - BIOMETRIC PROFILE - INTEROPERABILITY AND DATA INTERCHANGE - DOD IMPLEMENTATIONS |
ANSI INCITS 422 | INFORMATION TECHNOLOGY - APPLICATION PROFILE FOR COMMERCIAL BIOMETRIC PHYSICAL ACCESS CONTROL |
ANSI INCITS 423.1 | INFORMATION TECHNOLOGY - CONFORMANCE TESTING METHODOLOGY STANDARD FOR BIOMETRIC DATA INTERCHANGE FORMAT STANDARDS - PART 1: GENERALIZED CONFORMANCE TESTING METHODOLOGY |
ANSI INCITS 423.4 | INFORMATION TECHNOLOGY - CONFORMANCE TESTING METHODOLOGY STANDARD FOR BIOMETRIC DATA INTERCHANGE FORMAT STANDARDS - PART 4: CONFORMANCE TSETING METHODOLOGY, FINGER IMAGE DATA INTERCHANGE FORMAT |
ANSI INCITS 424 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - FRAMING AND SIGNALING-2 (FC-FS-2) |
ANSI INCITS 425 | INFORMATION TECHNOLOGY - TRANSIT FARE CARDS - INTEROPERABILITY FRAMEWORK OF CONTACTLESS FARE PAYMENT AND SYSTEMS |
ANSI INCITS 426 | INFORMATION TECHNOLOGY - FIBRE CHANNEL SECURITY PROTOCOLS (FC-SP) |
ANSI INCITS 427 | INFORMATION TECHNOLOGY - FIBRE CHANNEL GENERIC SERVICES - 5 (FC-GS-5) |
ANSI INCITS 428 | INFORMATION TECHNOLOGY - STORAGE MANAGEMENT HOST BUS ADAPTER APPLICATION PROGRAMMING INTERFACE (SM-HBA) |
ANSI INCITS 430 | INFORMATION TECHNOLOGY - SCSI MULTI-MEDIA COMMANDS - 5 (MMC-5) |
ANSI INCITS 431 | INFORMATION TECHNOLOGY - SCSI/ATA TRANSLATION (SAT) |
ANSI INCITS 432 | INFORMATION TECHNOLOGY - FABRIC APPLICATION INTERFACE STANDARD (FAIS) |
ANSI INCITS 433 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - LINK SERVICES (FC-LS) |
ANSI INCITS 434 | INFORMATION TECHNOLOGY - TENPRINT CAPTURE USING BIOAPI |
ANSI INCITS 435 | FOR INFORMATION TECHNOLOGY - FIBRE CHANNEL - BASET (FC-BASET) |
ANSI INCITS 437 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - SATA TUNNELING PROTOCOL (FC-SATA) |
ANSI INCITS 438 | INFORMATION TECHNOLOGY - SERVER MANAGEMENT COMMAND LINE PROTOCOL (SM CLP) SPECIFICATION |
ANSI INCITS 439 | INFORMATION TECHNOLOGY - FUSION INFORMATION FORMAT FOR DATA INTERCHANGE |
ANSI INCITS 441 | INFORMATION TECHNOLOGY - AUTOMATION/DRIVE INTERFACE - COMMANDS - 2(ADC-2) |
ANSI INCITS 442 | INFORMATION TECHNOLOGY - BIOMETRIC IDENTITY ASSURANCE SERVICES - (BIAS) |
ANSI INCITS 446 | INFORMATION TECHNOLOGY - MINIMUM GEOGRAPHIC FEATURE IDENTIFYING ATTRIBUTES |
ANSI INCITS 45 | INFORMATION SYSTEMS - CHARACTER SET FOR HANDPRINTING |
ANSI INCITS 46 | UNRECORDED MAGNETIC 6-DISK PACK (GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS) |
ANSI INCITS 47 | INFORMATION SYSTEMS - CODES - STRUCTURE AND DATA REQUIREMENTS FOR THE IDENTIFICATION OF NAMED POPULATED PLACES, PRIMARY COUNTY DDIVISIONS, AND OTHER LOCATIONAL ENTITIES OF THE UNITED STATES AND ITS OUTLYING AND ASSOCIATED AREAS FOR INFORMATION INTERCHANGE |
ANSI INCITS 48 | MAGNETIC TAPE CASSETTES FOR INFORMATION INTERCHANG |
ANSI INCITS 49 | CHARACTER SET FOR OPTICAL CHARACTER RECOGNITION (OCR-B) |
ANSI INCITS 50 | INFORMATION SYSTEMS - REPRESENTATIONS FOR U.S. CUSTOMARY, SI, AND OTHER UNITS TO BE USED IN SYSTEMS WITH LIMITED CHARACTER SETS |
ANSI INCITS 52 | UNRECORDED SINGLE-DISK CARTRIDGE (FRONT LOADING, 2200 BPI), GENERAL, PHYSICAL, AND MAGNETIC REQUIREMENTS |
ANSI INCITS 53 | PROGRAMMING LANGUAGE PL/I |
ANSI INCITS 54 | INFORMATION SYSTEMS - RECORDED MAGNETIC TAPE FOR INFORMATION INTERCHANGE - (6250 CPI, GROUP-CODED RECORDING) |
ANSI INCITS 55 | UNRECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.250 INCH (6.30 MM), 1600 BPI (63 BPMM), PHASE ENCODED |
ANSI INCITS 56 | RECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION |
ANSI PH1.51 | PHOTOGRAPHY (FILMS) - MICROGRAPHIC SHEET AND ROLL FILMS - DIMENSIONS |
ANSI PH1.52 | ENGINEERING REPRODUCTION SHEET AND ROLL FILM - DIMENSIONS |
ANSI PH1.53 | PROCESSED FILMS, PLATES, AND PAPERS - FILING ENCLO |
ANSI PH1.54 | PHOTOGRAPHY (PAPER)-PHOTOGRAPHY PAPERS IN ROLLS FO |
ANSI PH1.55 | 110-SIZE CARTRIDGES-DIMENSIONS OF FILM & BACKING- |
ANSI PH1.56 | 110-SIZE CARTRIDGES-DIMENSIONS OF FILM EXPOSURE- |
ANSI PH1.57 | 110-SIZE CARTRIDGES-DIMENSIONS FOR PHOTOGRAPHY- |
ANSI PH1.58 | PHOTOGRAPHY (PAPER) ENGINEERING REPRODUCTIONS DIME |
ANSI PH1.59 | THICKNESS OF METAL LITHOGRAPHIC PLATES |
ANSI PH1.60 | AMMONIA - PROCESSED DIAZO FILMS - SPECIFICATIONS |
ANSI PH1.62 | DIMENSIONS/PAPERBOARD CORES/RADIATION-SENSITIVE |
ANSI PH1.64 | FOR PHOTOGRAPHY (PAPER) - PAPERBOARD CORES - DIMENSIONS |
ANSI PH1.65 | FOR PHOTOGRAPHY (FILM) DISC FILM CARTRIDGE DIMENSIONS AND FUNCTIONAL REQUIREMENTS |
ANSI PH1.66 | RADIOGRAPHIC FILMS, SILVER - GELATIN TYPE ON POLYE |
ANSI PH1.67 | PROCESSED VESICULAR FILM-SPECIFICATIONS FOR STABILITY |
ANSI PH1.68 | INTRAORAL DENTAL RADIOGRAPHIC FILMS - SIZE DESIGNATIONS AND DIMENSIONS |
ANSI PH1.71 | SHEET AND ROLL FILMS FOR USE IN SCANNERS - DIMENSIONS |
ANSI PH2.1 | SPECTRAL DIFFUSE DENSITIES/3-COMPONENT SUB.COLOR |
ANSI PH2.10 | EVALUATING FILMS/MONITORING X-RAYS,GAMMA RAYS |
ANSI PH2.12 | GENERAL-PURPOSE PHOTOGRAPHIC EXPOSURE METERS (PHOTOELECTRIC TYPE) |
ANSI PH2.13 | TESTNG.PHOTOGRAPHIC FLASH LAMPS |
ANSI PH2.15 | AUTOMATIC EXPOSURE CONTROLS FOR CAMERAS |
ANSI PH2.16 | PHOTOGRAPHY (SENSITOMETRY)-DENSITY MEASUREMENTS- |
ANSI PH2.17 | DENSITY MEASUREMENTS - GEOMETRIC CONDITIONS FOR |
ANSI PH2.18 | DENSITY MEASUREMENTS - SPECTRAL CONDITIONS |
ANSI PH2.19 | DENSITY MEASUREMENTS-GEOMETRIC CONDITIONS FOR TRAN |
ANSI PH2.2 | PHOTOGRAPHY(SENSITOMETRY) BLACK/WHITE CONTINOUS- |
ANSI PH2.20 | PHOTOGRAPHY (SENSITOMETRY) F/4.5 AND F/1.6 |
ANSI PH2.21 | PHOTOGRAPHY (SENSITOMETRY) COLOR REVERSAL CAMERA |
ANSI PH2.22 | PHOTOGRAPHY (SENSITOMETRY) - DETERMINATION OF SAFELIGHT CONDITIONS |
ANSI PH2.23 | LIGHTING CONDITIONS FOR VIEWING PHOTOGRAPHIC COLOR PRINTS AND TRANSPARENCIES |
ANSI PH2.25 | PHOTOGRAPHIC PRINTING DENSITY CARBON STEP TABLET |
ANSI PH2.27 | COLOR NEGATIVE FILMS FOR STILL PHOTOGRAPHY-DETERMINATION OF ISO SPEED |
ANSI PH2.28 | CAMERA FLASH ILLUMINANTS - DETERMINATION OF ISO |
ANSI PH2.29 | PHOTOGRAPHY (SENSITOMETRY) - ILLUMINANTS FOR SENSITOMETRY - SPECIFICATIONS FOR DAYLIGHT AND INCANDESCENT TUNGSTEN |
ANSI PH2.30 | COLOR PRINTS, TRANSPARENCIES, AND PHOTOMECHANICAL REPRODUCTIONS - VIEWING CONDITIONS |
ANSI PH2.31 | DIRECT VIEWING/PHOTOGRAPHIC COLOR TRANSPARENCIES |
ANSI PH2.32 | VIEWING CONDITIONS/APPRAISAL/COLOR QUALITY |
ANSI PH2.33 | PHOTOGRAPHY (MATERIALS)-DETERMINATION OF ISO RESLV |
ANSI PH2.34 | BLACK-AND-WHITE AERIAL CAMERA FILMS-DETERMINATION |
ANSI Z12.11 | ALUMINUM AND MAGNESIUM POWDER |
ANSI Z12.12 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
ANSI Z12.16 | PREVENTION OF DUST EXPLOSIONS |
ANSI Z12.19 | PROCESSING AND FINISHING OF ALUMINUM |
ANSI Z12.2 | MANUFACTURING AND HANDELING OF STARCH |
ANSI Z12.20 | PREVINTION OF FIRE EXPLOSIONS IN WOOD PROCESSING |
ANSI Z12.3 | DUST EXPLOSIONS IN FEED MILLS |
ANSI Z12.4 | DUST EXPLOSIONS IN GRAIN ELEVATORS |
ANSI Z12.5 | MILLING OF AGRICULTURAL COMMODITIES/HUMAN CONSUMPT |
ANSI Z12.7 | COAL PREPARATION PLANTS |
ANSI Z120.1 | PRESSURE AND COMMERCIAL MOTOR CRAFT |
ANSI Z121.1 | VIBRATING SCREENS |
ANSI Z123.1 | TOTAL ASH & SILICA IN WATER-EMULSION POLISHES |
ANSI Z123.3 | SEDIMENT IN WATER-EMULSION POLISHES BY CENTRIFUGE |
ANSI Z129.1 | HAZARDOUS INDUSTRIAL CHEMICALS PRECAUTIONARY LABELING |
ANSI Z130.1 | FOR GOLF CARS - SAFETY AND PERFORMANCE SPECIFICATIONS |
ANSI Z131.1 | SPECULAR GLOSS METHOD OF TEST |
ANSI Z135 | FOR PERSONAL TRANSPORT VEHICLES - SAFETY AND PERFORMANCE SPECIFICATIONS |
ANSI Z135.1 | MEDICAL QUALIFICATIONS, DIVING, PERSONAL, COMMERCI |
ANSI Z135.3 | DIVING EQUIPMENT, COMMERCIAL, INDUSTRIAL/OPERATION |
ANSI Z135.4 | DIVING TECHNQUES/PROCEDURES, COMMERCIAL, INDUSTRIA |
ANSI Z135.5 | RECORD KEEPING, COMMERCIAL, INDUSTRIAL DIVING OPER |
ANSI Z138.1 | APPEARANCE OF MATERIALS, DEFINITIONS OF TERMS |
ANSI Z138.2 | SEE ASTM E 308 |
ANSI Z143.1 | FILMS HYDROPHOBIC SURFACE "THE ATOMIZER TEST" |
ANSI Z146.1 | MEASURING AND COUNTING PARTICULATE CONTAMINATION |
ANSI Z158.3 | EVALUATING DEGREE OF RUSTING ON PAINTED STEEL |
ANSI Z16.1 | METHOD OF RECORDING & MEASURING WORK INJURY EXPERIENCE |
ANSI Z16.2 P1 | COMPILING INDUSTRIAL ACCIDENT CAUSES |
ANSI Z16.2 P2 | DETAILED CLASSIFICATION OD ACCIDENT FACTORS |
ANSI Z16.4 | UNIFORM RECORDKEEPING/OCCUPATIONAL INJURIES/ILLNES |
