Popular Standards |
|
BS 1881 P103 | TESTING
CONCRETE - METHOD FOR DETERMINATION OF COMPACTING FACTOR |
BS 1881 P104 | METHOD FOR
DETERMINATION OF VEBE TIME |
BS 1881 P105 | METHOD FOR
DETERMINATION OF FLOW |
BS 1881 P106 | METHODS FOR
DETERMINATION OF AIR CONTENT OF FRESH CONCRETE |
BS 1881 P107 | METHOD FOR
DETERMINATION OF DENSITY OF COMPACTED FRESH CONCRETE |
BS 1881 P108 | METHOD FOR
MAKING TEST CUBES FROM FRESH CONCRETE |
BS 1881 P110 | METHODS FOR
MAKING TEST CYLINDERS FROM FRESH CONCRETE |
BS 1881 P111 | METHODS OF
NORMAL CURING OF TEST SPECIMENS (20 DEGREE C METHOD) |
BS 1881 P112 | METHODS OF
ACCELERATED CURING OF TEST CUBES |
BS 1881 P113 | METHODS FOR
MAKING AND CURING NO-FINES TEST CUBES |
BS 1881 P114 | METHODS FOR
DETERMINATION OF DENSITY OF HARDENED CONCRETE |
BS 1881 P115 | COMPRESSION
TESTING MACHINES FOR CONCRETE |
BS 1881 P117 | METHOD FOR
DETERMINATION OF TENSILE SPLITTING STRENGTH |
BS 1881 P118 | METHOD FOR
DETERMINATION OF FLEXURAL STRENGTH |
BS 1881 P119 | METHOD FOR
DETERMINATION OF COMPRESSIVE STRENGTH USING PORTIONS OFBEAMS BROKEN IN FLEXURE (EQUIVALENT CUBE METHOD) |
BS 1881 P120 | METHOD FOR
DETERMINATION OF THE COMPRESSIVE STRENGTH OF CONCRETE CORES |
BS 1881 P121 | METHODS FOR
DETERMINATION OF STATIC MODULUS OF ELASTICITY IN COMPRESSION |
BS 1881 P122 | METHODS FOR
DETERMINATION OF WATER ABSORPTION |
BS 1881 P124 | METHOD FOR
ANALYSIS OF HARDENED CONCRETE |
BS 1881 P125 | METHODS FOR
MIXING AND SAMPLING FRESH CONCRETE IN THE LABORATORY |
BS 1881 P127 | METHOD FOR
VERIFYING THE PERFORMANCE OF A CONCRETE CUBE COMPRESSION MACHINE USING THE COMPARATIVE CUBE TEST |
BS 1881 P128 | TESTING
CONCRETE - PART 128. METHODS FOR ANALYSIS OF FRESH CONCRETE |
BS 1881 P129 | METHOD FOR
DETERMINATION OF DENSITY OF PARTIALLY COMPACTED SEMI- DRY FRESH CONCRETE |
BS 1881 P130 | TESTING
CONCRETE - PART 130: METHOD FOR TEMPERATURE-MATCHED CURINGOF CONCRETE SPECIMENS |
BS 1881 P131 | TESTING
CONCRETE - PART 131. METHODS FOR TESTING CEMENT IN A REFERENCE CONCRETE |
BS 1881 P201 | GUIDE TO THE
USE OF NON-DESTRUCTIVE METHODS OF TEST FOR HARDENED CONCRETE |
BS 1881
P202 | RECOMMENDATIONS FOR SURFACE HARDNESS TESTING BY REBOUND HAMMER |
BS 1881
P203 | RECOMMENDATIONS FOR MEASUREMENT OF VELOCITY OF ULTRASONIC PULSES IN CONCRETE |
BS 1881
P204 | RECOMMENDATIONS ON THE USE OF ELECTROMAGNETIC COVERMETERS |
BS 1881 P205 | TESTING
CONCRETE: RECOMMENDATIONS FOR RADIOGRAPHY OF CONCRETE |
BS 1881
P206 | RECOMMENDATIONS FOR DETERMINATION OF STRAIN IN CONCRETE |
BS 1881
P207 | RECOMMENDATIONS FOR THE ASSESSMENT OF CONCRETE STRENGTH BY NEAR- TO-SURFACE TESTS |
BS 1881 P208 | TESTING
CONCRETE - PART 208: RECOMMENDATIONS FOR THE DETERMINATIONOF THE INITIAL SURFACE ABSORBTION OF CONCRETE |
BS 1881
P209 | RECOMMENDATIONS FOR THE MEASUREMENT OF DYNAMIC MODULUS OF ELASTICITY |
BS 1881 P4 | TESTING CONCRETE
FOR STRENGTH, METHODS FOR |
BS 1881-109 | TESTING
CONCRETE - PART 109: METHOD FOR MAKING TEST BEAMS FROM FRESH CONCRETE |
BS 1881-116 | METHOD FOR
DETERMINATION OF COMPRESSIVE STRENGTH OF CONCRETE CUBES |
BS 1881-5 | METHODS OF TESTING
HARDENED CONCRETE FOR OTHER THAN STRENGTH |
BS 1882 | FLEXIBLE POLYMERIC
TUBING & DRAINAGE SHEETING |
BS 1884 | RUBBER POST-MORTEM
GLOVES |
BS 267 | COLD ROLLED BRASS SHEET,
STRIP AND FOIL. 70/30 BRASS |
BS 268 | SWITCHGEAR CELLS AND
CUBICLES CONSTRUCTED OF CONCRETE AND MOULDED STONE |
BS 2687 | SPECIFICATION FOR
AGRICULTURAL DISCS |
BS 2688 | DIMENSIONS OF IMPULSE
MAGNETOS (UNSCREENED AND SCREENED) |
BS 2689 | RECOMMENDED METHODS
FOR ESTIMATING THE EFFECT OF DELETERIOUS SUBSTANCES IN FIBROUS ELECTRICAL INSULATING MATERIALS |
BS 269 | RULES FOR METHODS FOR
DECLARING EFFICIENCY OF ELECTRICAL MACHINERY |
BS 2690 P1 | COPPER AND
IRON |
BS 2690 P100 | FOREWARD,
SCOPE AND GENERAL REQUIREMENTS |
BS 2690 P101 | DISSOLVED
OXYGEN |
BS 2690 P102 | HYDRAZINE:
SPECTROPHOTOMETRIC METHOD (4-DIMETHYLAMINOBENZALDEHYDE) |
BS 2690 P104 | SILICA:
REACTIVE, TOTAL AND SUSPENDED |
BS 2690 P105 | SOLUBLE
PHOSPHATE AND ORGANOPHOSPHORUS COMPOUNDS |
BS 2690 P106 | REACTIVE
ALUMINIUM SPECTROPHOTOMETRIC METHOD (CATECHOL VIOLET) |
BS 2690 P108 | FLOURIDE:
SPECTROPHOTOMETRIC METHOD (ALLISARIN FLOURIDE BLUE) |
BS 2690 P109 | ALKALINITY,
ACIDITY, PH VALUE AND CARBON DIOXIDE |
BS 2690 P11 | ANIONIC, CATIONIC
AND NON-IONIC DETERGENTS AND OIL |
BS 2690 P117 | LONG-CHAIN
FATTY AMINES SPECTROPHOTOMETRIC METHOD |
BS 2690
P119 | ODOUR |
BS 2690 P12 | NICKEL, ZINC,
CHROMATES AND TOTAL CHROMIUM AND MANGANESE |
BS 2690 P120 | SUSPENDED
SOLIDE: GRAVIMETRIC METHOD (AFTER FILTRATION) |
BS 2690 P121 | DISSOLVED
SOLIDS: GRAVIMETRIC METHOD (AFTER EVAPORATION) |
BS 2690
P123 | SODIUM |
BS 2690 P124 | POTASIUM FLAME
PHOTOMETRIC METHOD |
BS 2690 P125 | LITHIUM: FLAME
PHOTOMETRIC METHOD |
BS 2690 P13 | DISCHROMATE
VALUE (CHEMICAL OXYGEN DEMAND), NON-VOLATILE ORGANIC CARBON, TANNINS, AND CHLORINE |
BS 2690 P14 | ARSENIC, LEAD
AND SULPHIDE |
BS 2690 P15 | FREE EDTA, TOTAL
SLATS OF EDTA, POLYARYLATE AND POLYMETHACRYLATE |
BS 2690 P2 | DISSOLVED OXYGEN,
HYDRAZINE AND SULPHITE |
BS 2690 P6 | METHODS OF
TESTING WATER USED IN INDUSTRY - PART 6: CHLORIDE AND SULPHATE |
BS 2690 P7 | NITRILE, NITRATE
AND AMMONIA (FREE, SALINE AND ALBUMINOID) |
BS 2690-
115 | CYCLOHEXYLAMINE: SPECTROPHOTOMETRIC METHOD |
BS 2690-116 | METHODS OF
TESTING WATER USED IN INDUSTRY - PART 116: MORPHOLINE: SPECTROPHOTOMETRIC METHOD |
BS 2691 | STEEL WIRE FOR
PRESTRESSED CONCRETE |
BS 2692 P1 | SPECIFICATION FOR
CURRENT-LIMITING FUSES |
BS 2692 P2 | EXPULSION
FUSES |
BS 2692 P3 | GUIDE TO THE
DETERMINATION OF SHORT CIRCUIT POWER FACTOR |
BS 2693 P1 | GENERAL PURPOSE
STUDS |
BS 2693 P2 | RECOMMENDATIONS
FOR HIGH GRADE STUDS (WITH CLASS 5 INTERFERENCE FIT THREADS TO AMERICA STANDARDS ASA B1.12) |
BS 2694 | ENVELOPES FOR LOCAL
AUTHORITIES |
BS 2695 | LAUNDRY
HAMPERS |
BS 1394 P1 | SPECIFICATION FOR
SAFETY REQUIREMENTS |
BS 1394 P2 | SPECIFICATION FOR
PHYSICAL AND PERFORMANCE REQUIREMENTS |
BS 1395 | 30-AMPERE FLAMEPROOF
PLUGS-AND-SOCKETS AND CABLE-COUPLERS |
BS 1396 | GAS METER
CUPBOARDS |
BS 1397 | SPECIFICATION FOR
INDUSTRIAL SAFETY BELTS, HARNESSES AND SAFETY LANYARD |
BS 1398 | LOW ALLOY STEEL
CASTINGS FOR USE AT ELEVATED TEMPERATURES |
BS 1399 P1 | DIMENSIONS OF
SHAFTS AND HOUSINGS |
BS 1399 P2 | METHODS OF
PERFORMANCE RATING |
BS 1399 P3 | TERMINOLOGY AND
RECOMMENDATIONS FOR HANDLING |
BS 14 | STRUCTURAL STEEL FOR THE
PRESSURE PARTS OF MARINE BOILERS |
BS 140 | LIQUID STARTERS AND
CONTROLLERS |
BS 1400 | COPPER ALLOY INGOTS,
COPPER ALLOY, & HIGH CONDUCTIVITY COPPER CASTINGS |
BS 1401-3 | COPPER AND BRASS
TUBES FOR GAS INSTALLATION WORK AND GAS LIGHTING FITTINGS |
BS 1404 | CINEMATOGRAPHY -
SPECIFICATION FOR SCREEN LUMINANCE FOR THE PROJECTION OF 35 MM FILM ON MATT AND DIRECTIONAL SCREENS |
BS 1405 | MEASURING APPARATUS
FOR PHOTOGRAPHIC PROCESSING |
BS 1406 | SIZES OF SENSITIZED
PHOTOGRAPHIC PLATES |
BS 1407 | SPECIFICATION FOR HIGH
CARBON BRIGHT STEEL (SILVER STEEL) |
BS 1408 | PATENTED COLD DRAWN
STEEL SPRING WIRE |
BS 1409 | LETTER SYMBOLS FOR
ELECTRONIC VALVES |
BS 141 | SWITCH STARTERS (STAR-
DELTA AND SERIES-PARALLEL) FOR ELECTRIC MOTORS |
BS 1410 | SPECIFICATION FOR MASTIC
ASPHALT FOR BUILDING (NATURAL ROCK ASPHALT AGGREGATE) |
BS 1411 | SPECIFICATION FOR
PRINTERS' CARDS AND BLANKS - (TERMS AND SIZES) |
BS 1412 | BATTERY CONNECTORS
FOR ELECTRIC VEHICLES |
BS 1413 | SPECIFICATION FOR PAGE
SIZE FOR BOOKS |
BS 1414 | STEEL WEDGE GATE
VALVES (FLANGED & BUTT-WELDING ENDS) FOR THE PETROLEUM, PETROCHEMICAL & ALLIED INDUSTRIES |
BS 1415 P1 | NON-THERMOSTATIC,
NON-COMPENSATING MIXING VALVES |
BS 1415 P2 | SPECIFICATION FOR
THERMOSTATIC MIXING VALVES |
BS 1416 | METHODS FOR THE
SAMPLING AND ANALYSIS OF RENNET CASEIN |
BS 1416C | COLOUR STANDARDS
FOR RENNET CASEIN |
BS 1417 | METHODS FOR THE
SAMPLING AND ANALYSIS OF ACID CASEIN |
BS 1417C | COLOUR STANDARDS
FOR ACID CASEIN |
BS 1418 | SPECIFICATION FOR MASTIC
ASPHALT FOR BUILDING (NATURAL ROCK ASPHALT AGGREGATE) |
BS 1419 | DOMESTIC STEEL LAY-ON
MATTRESSES (SPIRAL SPRING TYPE) |
BS 142 P0 | GENERAL
INTRODUCTION AND LISTS OF PARTS |
BS 142 P1 S1.1 | GLOSSARY OF
PROTECTION RELAY TERMS |
BS 142 P1
S1.2 | SPECIFICATION FOR CONTACT PERFORMANCE |
BS 142 P1
S1.3 | SPECIFICATION FOR INSULATION TESTING |
BS 142 P1
S1.4 | SPECIFICATION FOR THE HIGH-FREQUENCY DISTURBANCE TESTS FOR STATIC RELAYS |
BS 142 P1 S1.4
SS1.4.1 | ELECTRICAL DISTURBANCE TESTS |
BS 142 P1 S1.4
SS1.4.4 | ELECTRICAL PROTECTION RELAYS - PART 1: INFORMATION AND REQUIREMENTS FOR ALL PROTECTION RELAYS - SECTION 1.4
SPECIFICATIONFOR ELECTRICAL DISTURBANCE TESTS SUBSECTION 1.4.4: FAST TRANSIENT DISTURBANCE TEST |
BS 2610 | METHOD FOR TEST FOR
THE DETERMINATION OF THE CUPRAMMONIUM FLUIDITYOF COTTON AND CERTAIN CELLULOSIC MAN-MADE FIBRES |
BS 2611 | CRATES FOR 1-PINT AND 1-
QUART MILK BOTTLES |
BS 2612 | ELECTRICALLY HEATED
BLANKETS FOR DOMESTIC USE |
BS 2613 | ELECTRICAL
PERFORMANCE OF ROTATING MACHINES |
BS 2614 | ALUMINIUM ALLOY
SECTIONS FOR MARINE PURPOSES |
BS 2615 | WARP-KNITTED FABRICS
(RAYON OR ACETATE) FOR UNDERWEAR AND NIGHTWEAR |
BS 2616 | MILK CAN WASHING
MACHINES |
BS 2617 | RESPIRATORS FOR
AGRICULTURAL WORKERS USING TOXIC CHEMICALS |
BS 2618 | SPECIFICATION FOR
ELECTRIC TRACTION EQUIPMENT |
BS 2619 | METHOD OF TEST AND
RATING FOR STEAM-HEATED AIR-HEATED BATTERIES |
BS 262 | TINTED READY MIXED PAINT
(OIL GLOSS) WHITE LEAD BASE |
BS 2620 | DIMENSIONS OF TINS FOR
PRINTING INKS |
BS 2621-5 | SPECIFICATIONS FOR
GLYCEROL |
BS 2626 | SPECIFICATION FOR
LUBRICANTS FOR REFRIGERANT COMPRESSORS |
BS 2627 | SPECIFICATION FOR
WROUGHT ALUMINIUM FOR ELECTRICAL PORPOSES. WIRE |
BS 2628 | SPECIFICATION FOR
NEEDLELOOM FELTS |
BS 2629 P1 | SPECIFICATION FOR
PRINCIPAL DIMENSIONS AND TOLERANCES |
BS 2629 P2 | RECOMMENDATIONS
FOR PALLETS FOR USE IN FREIGHT CONTAINERS |
BS 2629 P3 | PERFORMANCE
REQUIREMENTS AND METHOD OF TEST |
BS 263 | BRAZING SOLDER (GRADES
AA, A AND B) |
BS 2630 | SPECIFICATION FOR
RESISTANCE PROJECTION WELDING OF UNCOATED LOW CARBON STEEL SHEET AND STRIP USING EMBOSSED PROJECTIONS |
BS 2631 | OIL SWITCHES FOR
ALTERING CURRENT SYSTEMS |
BS 2632 | MAINS-OPERATED
ELECTRIC FENCE CONTROLLERS |
BS 2633 | SPECIFICATION FOR CLASS
I ARC WELDING OF FERRITIC STEEL PIPEWORK FOR CARRYING FLUIDS |
BS 2634 P1 | SPECIFICATION FOR
TURNED, GROUND, BORED, MILED, SHAPED AND PLANED SPECIMENS |
BS 2634 P2 | SPECIFICATION FOR
SPARK-ERODED, SHOT, BLASTED, GRIT-BLASTED, AND POLISHED SPECIMENS |
BS 2634 P3 | CAST
SURFACES |
BS 2635 | DRAFTING SPECIFICATIONS
BASED ON LIMITING THE NUMBER OF DEFECTIVESPERMITTED IN SMALL SAMPLES |
BS 2636 | RETURNABLE WOODEN
BOXES FOR FLOWERS |
BS 2637 | METHOD FOR
DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION-TYPE FUELS (MOTOR METHOD) |
BS 2638 | METHOD FOR
DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS (RESEARCH METHOD) |
BS 2639 | SCHOOL DINING TABLES
AND CHAIRS |
BS 264 | HOT ROLLED YELLOW METAL
PLATES, SHEET AND STRIP (EXCLUDING CONDENSER PLATES AND SHIP'S SHEATHING) |
BS 2640 | SPECIFICATION FOR CLASS
II OXY-ACETYLENE WELDING OF CARBON STEEL PIPEWORK FOR CARRYING FLUIDS |
BS 2641 | GLOSSARY OF TERMS
RELATING TO AUTOMATIC DIGITAL COMPUTERS |
BS 2642 | GENERAL REQUIREMENTS
FOR THE ARC WELDING OF CARBON MANGANESE STEELS |
BS 2643 | GLOSSARY OF TERMS
RELATING TO THE PERFORMANCE OF MEASURING INSTRUMENTS |
BS 2644 | METHOD FOR
DETERMINATION OF WATER ABSORPTIVENESS OF PAPER AND BOARD (COBB METHOD) |
BS 2645 | TESTS FOR USE IN THE
APPROVAL OF WELDERS |
BS 2646-1 | AUTOCLAVES FOR
STERILIZATION IN LABORATORIES - PART 1: SPECIFICATION FOR DESIGN, CONSTRUCTION, SAFETY AND PERFORMANCE |
BS 2G 147 P2 | THREE-PHASE
VARIABLE FREQUENCY SQUIRREL-CAGE INDUCTION MOTORS |
BS 2G 180 | SPECIFICATION FOR
PERMANANENT SPLICING OF AIRCRAFT ELECTRICAL CABLES |
BS 2G 181 | SPECIFICATION FOR
AIRCRAFT FILAMENT LAMPS |
BS 2G 182 | SPECIFICATION FOR
PRESSURE-DRIVEN MACHMETERS FOR AIRCRAFT |
BS 2G 191 | SPECIFICATION FOR
LIGHTING FOR AIRCRAFT INDICATORS USING INTEGRAL FILAMENT LAMPS |
BS 2G 196 | SPECIFICATION FOR
STATIC INVERTORS |
BS 2G 198 P1 | ELASTOMERIC
SLEEVES FOR BINDING & IDENTIFICATION |
BS 2G 198 P2 | SLIP-ON SLEEVES
FOR IDENTIFICATION PURPOSES |
BS 2G 198 P3 | SLEEVES FOR
AIRCRAFT ELECTRIC CABLES AND EQUIPMENT WIRES - PART 3:SPECIFICATION FOR HEAT-SHRINKABLE SLEEVING FOR BINDING, INSULATIONAND |
BS 2G 198-4 | SPECIFICATION FOR
SEMI-RIGIED HIGH PERFORMANCE HEAT SHRINKABLE SLEEVING FOR BINDING AND INSULATION |
BS 2G 199 | SCHEDULE FOR
TABLES RELATING TO ALTITUDES, AIRSPEED AND MACH NUMBERS FOR USE IN AERONAUTICAL INSTRUMENT DESIGN AND CALIBRATION |
BS 2G 201 | SPECIFICATION FOR
COUNTER AND POINTER PRESSURE ALTIMETERS |
BS 2G 202 | SPECIFICATION FOR
DESIGN AND PERFORMANCE REQUIREMENTS FOR AIRFRAMEFIT ELECTRICAL CONNECTORS FOR D.C. AND LOW FREQUENCY A.C. APPLICATIONS |
BS 2G 210 | SPECIFICATION FOR
PTFE INSULATED EQUIPMENT WIRES AND CABLES, SINGLE-AND MULTI-CORE, WITH SILVER PLATED COPPER CONDUCTORS (190 DEGREES C) OR NICKEL PLATED
COPPER CONDUCTORS (260 DEGREES C) |
BS 2G 213 | SPECIFICATION FOR
MECHANICALLY OPERATED SWITCHES |
BS 2G 215 P2 | SPECIFICATION
FOR TERMINATIONS |
BS 2G 215-1 | EXTENSION CABLES
FOR AIRCRAFT NICKEL- CHROMIUM AND NICKEL- ALUMINIUM THERMOCOUPLE PT 1: CONDUCTORS |
BS 2G 219 | SPECIFICATION FOR
GENERAL REQUIREMENTS FOR GROUND SUPPORT ELECTRICAL SUPPLIES FOR AIRCRAFT |
BS 2G 221 | SPECIFICATION FOR
MINYVIN TYPE ELECTRIC CABLES (METRIC UNITS) |
BS 2G 223 | SPECIFICATION FOR
SCREEN TERMINATING DEVICES FOR AIRCRAFT ELECTRICCABLES |
BS 2G 229 | SCHEDULE FOR
ENVIRONMENTAL CONDITIONS AND TEST PROCEDURES FOR AIRBORNE EQUIPMENT |
BS 2G 230 | SPECIFICATION FOR
GENERAL REQUIREMENTS FOR AIRCRAFT ELECTRICAL CABLES (SECOND SERIES) |
BS 2G 231 | SPECIFICATIONFOR
CONDUCTORS FOR GENERAL PURPOSE ARICRAFT ELECTRICAL CABLES AND AEROSPACE APPLICATIONS |
BS 2G 232 | SPECIFICATION FOR
ELECTRIC CABLES FOR GENERAL AIRFRAME OR EQUIPMENT INTERCONNECT USE (135 DEGREES C) WRAPPED INSULATION |
BS 2G 233 | SPECIFICATION FOR
ELECTRIC CABLES FOR GENERAL AIRFRAME OR EQUIPMENT INTERCONNECT USE (135 DEGREES C), EXTRUDED INSULATION |
BS 2G 238 | SPECIFICATION FOR
ELECTRIC CABLES FOR GENERAL AIRFRAME OR EQUIPMENT INTERCONNECT USE (260 DEGREES C), NICKEL PLATED COPPER AND COPPER ALLOY CONDUCTORS, WITH
WRAPPED INSULATION |
BS 2G 239 | SPECIFICATION FOR
PRIMARY ACTIVE LITHIUM BATTERIES FOR USE IN AIRCRAFT |
BS 2H 1 | HEATING TREATMENT.
NORMALISING AEROPLANE FITTINGS (MADE OF STEELS S.3, S.1PART 2, S.6, T.21 AND T.26) |
BS 2H 5 | CASE HARDENING
MIXTURE |
BS 2HC 101 | SPECIFICATION FOR
PRECIPITATION HARDENING CHROMIUM-NICKEL- COPPER-MOLYBDENUM STEEL CASTNGS (950 MPA) |
BS 2HC 102 | SPECIFICATION FOR
PRECIPITATION HARDENING CHROMIUM-NICKLE-COPPER- MOLYBDENUM STEEL CASTING (1250 MPA) |
BS 2HC 203 | SPECIFICATION FOR
NICKEL-CHROMIUM-ALUMINIUM-MOLYBDENUM-NIOBIUM ALLOY CASTINGS (NICKEL BASE CR 13.0, A1 6.0, MO 4.5, NB 2.3) |
BS 2HC 204 | SPECIFICATION FOR
NICKEL-COBALT-CHROMIUM-ALUMINIUM-TITANIUM- MOLYBDENUM ALLOY CASTINGS (NICKEL BASE CO 15.0, CR 10.0, A15.5, TI4.8, MO 3.0) |
BS 2HC 207 | SPECIFICATION FOR
NICKEL-COBALT-TUNGSTEN-CHROMIUM-ALUMINIUM- TANTALUM-HAFNIUM-TITANIUM ALLOY CASTINGS (NICKEL BASE CO 10.0 W 10.0, CR 9.0, A15.5, TA 2.5, HF 1.5., TI |
BS 2HC 208 | SPECIFICATION FOR
NICKEL-COBALT-TUNGSTEN-CHROMIUM-ALUMINIUM- MOLYBDENUM-TITANIUM-TANTALUM ALLOY CASTINGS (NICKEL BASE CO 10.0, W 10.0, CR 9.0, AL 5.5, MO 2.5, TI 1.5, TA
1.5) |
BS 2HC 209 | SPECIFICATIONFOR
LOW CARBON, PRECIPITATION HARDENING NICKEL- CHROMIUM-ALUMINIUM-MOLYDBENUM-NIOBIUM ALLOY CASTINGS (NICKEL BASE CR 11.5, AL 6.0, MO 4.0, NB |
BS 2HC 210 | SPECIFICATION FOR
NICKEL-TUNGSTEN-ALUMININUM-CHROMIUM-MOLYBDENUM ALLOY CASTINGS (NICKEL BASE W 10.5, AL 6.0, CR 6.0, MO 2.0) |
BS 2HC 211 | SPECIFICATION FOR
NICKEL-CHROMIUM-COBALT-MOLYBDENUM-ALLUMINIUM- TITANIUM ALLOY CASTINGS (NICKEL BASE CR 15.5, CO 10.0, MO 8,3, A1 4.2, TI 3.6) |
BS 2HR 1 | SPEICIFICATION FOR
NICKEL-CHROMIUM-TITANIUM-ALUMININUM HEAT- RESISTING ALLOY BILLETS, BARS FORGINGS AND PARTS (NICKEL BASE, CR 19.5, TI 2.2, AL 1.4) |
BS 2HR 2 | SPECIFICATION FOR
NICKEL-CHROMIUM-COBALT-TITANIUM-ALUMININUM HEAT-RESISTING ALLOY BILLETS, BARS, FORGINGS AND PARTS (NICKEL BASE, CR19.5, CO 18.0, TI 2.5, AL |
BS ISO 18185-1 | FREIGHT
CONTAINERS - ELECTRONIC SEALS - PART 1: COMMUNICATION PROTOCOL |
1000:AUX 1E
(41/435) | UNIVERSAL DECIMAL CLASSIFICATION |
5499-5 | GRAPHICAL SYMBOLS AND
SIGNS - SAFETY SIGNS, INCLUDING FIRE SAFETY PART 5: SIGNS WITH SPECIFIC SAFETY MEANINGS |
89/38945 | COMPONENTS FOR
HALON AND CARBON DIOXIDE FIRE EXTINGUISHING SYSTEMS |
89/40179 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 1; SPECIFICATION FOR AUTOMATIC CONTROL DEVICES |
89/40180 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 2: SPECIFICATION FOR MANUAL REPORTING DEVICES |
89/40181 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 3: SPECIFICATION FOR DELAY DEVICES |
89/40182 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 4: SPECIFICATION FOR CYLINDER VALVES (HIGH PRESSURE) |
89/40183 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 5: SPECIFICATION FOR LOCAL APPLICATION AND LOW PRESSURE VALVES AND TRIGGERING DEVICES |
89/40184 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 6: SPECIFICATION FOR RELEASE DEVICES FOR BANKS OF CYLINDERS |
89/40185 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING EQUIPMENT PART 7: SPECIFICATION FOR LOCK-OFF DEVICES |
89/40186 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 8: SPECIFICATION FOR TEST AND INSPECTION EQUIPMENT |
89/40187 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 9: SPECIFICATION FOR CONTAINERS AND ACCESSORIES |
89/40188 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 10: SPECIFICATION FOR NOZZLES |
89/40189 | COMPONENTS FOR
CARBON DIOXIDE EXTINGUISHING SYSTEMS PART 11: SPECIFICATION FOR HOSES AND CYLINDER CONNECTION PIPING |
AECMA PREN 2030 | STEEL
FE-PM43 HARDENED AND TEMPERED BARS D LESS THAN OR EQUAL TO 150 MM AEROSPACE SERIES |
AECMA PREN
2255 | AEROSPACE SERIES FLEXIBLE HOSE ASSEMBLIES IN POLYTETRAFLUOROETHYLENE (PTFE0 - TYPE 3 - TECHNICAL SPECIFICATON |
AECMA PREN
2267 | AEROSPACE SERIES ELECTRICAL CABLES FOR GENERAL PURPOSE OPERATING TEMPERATURES BETWEEN - 55 C AND + 260 C |
AECMA PREN
2347 | AEROSPACE SERIES FLEXIBLE HOSE ASSEMBLIES IN POLYTETRA- FLUOROETHYLENE (PTFE) - TYPE 4 - TECHNICAL |
AECMA PREN
3332 | AEROSPACE SERIES ALUMINIUM ALLOY AL-P7475-T762 CLAD SHEET AND STRIP 1,0 MM LESS OR EQUAL TO OR A LESS THAN OR EQUAL TO A |
AECMA PREN 3645-
001 | AEROSPACE SERIES CONNECTOR, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE
175 DEGREES CELCIUS OR 200 DEGREES CELSIUS CONTINUOUS PART 001: TECHNICAL SPECIFICATION |
AECMA PREN 3645-
002 | AEROSPACE SERIES CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING
TEMPERATURE DEGREES CELCIUS OR 200 DEGREES CELSIUS PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
AECMA PREN 3841-
301 | AEROSPACE SERIES CIRCUIT BREAKERS TEST METHODS PART 301: VOLTAGE DROP |
AECMA PREN 3841-
302 | AEROSPACE SERIES CIRCUIT BREAKERS TEST METHODS PART 302: INSULATION RESISTANCE |
AECMA PREN 3841-
303 | AEROSPACE SERIES CIRCUIT BREAKERS TEST METHODS PART 303: DIELECTRIC STRENGTH |
AECMA PREN 3841-
304 | AEROSPACE SERIES CIRCUIT BREAKERS TEST METHODS PART 304: TRIPPING POINTS |
AECMA PREN 3841-
305 | AEROSPACE SERIES CIRCUIT BREAKERS TEST METHODS PART 305: SHORT-CIRCUIT PERFORMANCE |
AECMA PREN 3841-
307 | AEROSPACE SERIES CIRCUIT BREAKERS TEST METHODS PART 307: PERFORMANCE WITH A LOCKED TRIPPING SYSTEM |
AECMA PREN 3841-
406 | AEROSPACE SERIES CIRCUIT BREAKERS TEST METHODS PART 406: FLAMMABILITY |
AECMA PREN 4531-
001 | AEROSPACE SERIES CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING FLUSH CONTACTS PART 001:
TECHNICAL SPECIFICATION |
AECMA PREN 4611-
002 | AEROSPACE SERIES CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY PART 002:
GENERAL |
AECMA PREN 4611-
003 | AEROSPACE SERIES CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY PART 003: TIN
PLATED COPPER OPERATING TEMPERATURES, BETWEEN -65 DEGREES CELSIUS AND 135 DEGREES CELSIUS SINGLE EXTRUDED WALL FOR ENCLOSED |
AECMA PREN 4611-
004 | AEROSPACE SERIES CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY PART 004: TIN
PLATED COPPER OPERATING TEMPERATURES, BETWEEN -65 DEGREES CELSIUS AND 135 DEGREES CELSIUS DUAL EXTRUDED WALL FOR OPEN |
AECMA PREN 4611-
005 | AEROSPACE SERIES CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY PART 005: SILVER
PLATED COPPER OPERATING TEMPERATURES, BETWEEN -65 DEGREES CELSIUS AND 150 DEGREES CELSIUS SINGLE EXTRUDED WALL FOR ENCLOSED |
AECMA PREN 4611-
006 | AEROSPACE SERIES CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY PART 006: SILVER
PLATED COPPER OPERATING TEMPERATURES, BETWEEN -65 DEGREES CELSIUS AND 150 DEGREES CELSIUS DUAL EXTRUDED WALL FOR OPEN |
AECMA PREN 4611-
007 | AEROSPACE SERIES CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY PART 007: NICKEL
PLATED COPPER OPERATING TEMPERATURES, BETWEEN -65 DEGREES CELSIUS AND 150 DEGREES CELSIUS DUAL EXTRUDED WALL FOR OPEN |
AECMA PREN 4611-
008 | AEROSPACE SERIES CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY PART 008: BP -
NICKEL PLATED COPPER OPERATING TEMPERATURES, BETWEEN -65 DEGREES CELSIUS AND 150 DEGREES CELSIUS DUAL EXTRUDED WALL FOR OPEN |
AECMA PREN 4611-
009 | AEROSPACE SERIES CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY PART 009: BJ -
NICKEL PLATED COPPER OPERATING TEMPERATURES, BETWEEN -65 DEGREES CELSIUS AND 150 DEGREES CELSIUS SINGLE EXTRUDED WALL FOR USE AS CABLE |
AECMA PREN
6074 | AEROSPACE SERIES METALLIC MATERIALS TEST METHODS STATISTICAL DATA FOR MATERIAL QUALITFICATION |
AECMA PREN
9102 | AEROSPACE SERIES QUALITY SYSTEMS FIRST ARTICLE INSPECTION |
AECMA PREN
9134 | AEROSPACE SERIES QUALITY SYSTEMS SUPPLY CHAIN RISK MANAGEMENT GUIDELINE |
BE EN ISO 11979-
1 | OPHTHALMIC IMPLANTS-INTRAOCULAR LENSES-PART 1: VOCABULARY |
BS 0 | A STANDARD FOR
STANDARDS |
BS 0 P2 | A STANDARD FOR
STANDARDS - PART 2. RECOMMENDATIONS FOR COMMITTEE PROCEDURES |
BS 0 P4 | BSI EDITORIAL
PRACTICE |
BS 0-1 | A STANDARD FOR STANDARDS
- PART 1: DEVELOPMENT OF STANDARDS - SPECIFICATION |
BS 0-2 | A STANDARD FOR STANDARDS
- PART 2: STRUCTURE AND DRAFTING - REQUIREMENTS AND GUIDANCE |
BS 0-3 | A STANDARD FOR STANDARDS
- PART 3. SPECIFICATION FOR STRUCTURE, DRAFTING AND PRESENTATION |
BS 1 | ROLLED STEEL SECTIONS FOR
STRUCTURAL PURPOSES |
BS 10 | FLANGES & BOLTING FOR PIPES,
VALVES & FITTINGS |
BS 100 | BODY SPACES AND FRAME
ENDS FOR CHASSIS FOR PRIVATE AUTOMOBILES (DIMESIONS FOR) |
BS 1000 | AUXILIARY SIGNS AND
SUBDIVISIONS (EXCEPT THOSE OF PLACE) |
BS 1000 AUX 1E
(41/435) | UNIVERSAL DECIMAL CLASSIFICATION- AUX TABLE 1E (41/435), COMMON AUXILIARIES OF PLACE FOR UNITED KINGDOM AND GERMANY.
EXTENDED EDITION |
BS 1000 AUX 1E
(71+73) | UNIVERSAL DECIMAL CLASSIFICATION - AUXILIARY TABLE 1E (71+73) - COMMOM AUXILIARIES OF PLACE FOR CANADA AND THE UNITED
STATES OF AMERICA. EXTENDED EDITION |
BS 1000 AUX I(E)
P3 | UNIVERSAL DECIMAL CLASSIFICATION ENGLISH FULL EDITION AUXILIARY TABEL I(E): PART 3: COMMON AUXILIARIES OF PLACE (5/9) ASIA, AFRICA,
THE AMERICAS, PACIFIC AND CIRCUMPOLAR TERRITORIES |
BS 1000 P1 | COMMON AUXILIARIES
OF PLACE (1/2) |
BS 1000 P2 | COMMON AUXILIARIES
OF PLACE (3/4) ANCIENT WORLD. MODERN EUROPE |
BS
1000(0) | GENERALITIES |
BS 1000(1) | PHILOSOPHY
(EXCLUDING 159.9 PSYCHOLOGY) |
BS
1000(159.9) | PSYCHOLOGY |
BS
1000(2) | RELIGION |
BS 1000(3/31) | SOCIAL
SCIENCES IN GENERAL. DEMOGRAPHY. SOCIOLOGY. STATISTICS. |
BS
1000(32) | POLITICS |
BS
1000(33) | ECONOMICS |
BS 1000(35/354) | PUBLIC
ADMINISTRATION |
BS 1000(355/359) | MILITARY
ART AND SCIENCE. NATIONAL DEFENSE. ARMED FORCES |
BS 1000(36) | SOCIAL WELFARE
AND RELIEF (EXCLUDING 368 INSURANCE) |
BS
1000(368) | INSURANCE |
BS 1000(37) | EDUCATION.
TEACHING. TRAINING. LEISURE |
BS
1000(383/389) | COMMUNICATIONS. TRANSPORT. METROLOGY. WEIGHTS AND MEASURES. |
BS 1000(39) | ETHNOLOGY.
ETHNOGRAPHY |
BS 1000(5/50) | EXACT
SCIENCES IN GENERAL. NATURE STUDY. CONSERVATION. ENVIRONMENTAL SCIENCES |
BS
1000(51) | MATHEMATICS |
BS 1000(52) | ASTRONOMY.
ASTROPHYSICS. SPACE RESEARCH. GEODESY |
BS
1000(53) | PHYSICS |
BS 1000(54) | CHEMISTRY.
CRYSTALLOGRAPHY. MINERALOGY |
BS 1000(55) | EARTH SCIENCES.
GEOLOGY. GEOPHYSICS |
BS
1000(56) | PALAEONTOLOGY |
BS 1000(57) | BIOLOGICAL
SCIENCES IN GENERAL. VIROLOGY. MICROBIOLOGY |
BS 1000(58) | BOTANY |
BS
1000(59) | ZOOLOGY |
BS 1000(6/611) | APPLIED
SCIENCES IN GENERAL. ANATOMY |
BS 1000(61/611) | MEDICAL
SERVICES IN GENERAL, ANATOMY |
BS
1000(612) | PHYSIOLOGY |
BS 1000(613) | HYGIENE
GENERALLY. PERSONAL HEALTH AND HYGIENE |
BS 1000(614) | PUBLIC HEALTH
AND HYGIENE. ACCIDENT PREVENTION |
BS 1000(615) | PHARMACEUTICS.
THERAPEUTICS. TOXICOLOGY |
BS
1000(616) | PATHOLOGY |
BS 1000(617) | ORTHOPAEDICS,
SURGERY, ORTHALMOLOGY |
BS 1000(618) | GYNAECOLOGY.
OBSTETRICS |
BS 1000(619) | VETERINARY
SCIENCES |
BS 1000(62/62-
9) | ENGINEERING, TECHNOLOGY IN GENERAL,. CHARACTERISTICS AND DETAILS OF MACHINES, EQUIPMENT, PLANT, PROCESSES AND |
BS 1000(620) | MATERIALS
TESTING. COMMERCIAL MATERIALS. POWER STATIONS. ECONOMICS OF ENERGY |
BS 1000(621.1/22) | UDC
621.1 HEAT ENGINES IN GENERAL. STEAM POWER. STEAM ENGINES. BOILERS UDC 621.22 WATER POWER. HYDRAULIC ENERGY |
BS 1000(621.3) | ELECTRICAL
ENGINEERING |
BS 1000(621.4) | HEAT
ENGINES (OTHER THAN STEAM ENGINES) |
BS 1000(621.5) | PNEUMATIC
ENERGY, MACHINERY AND TOOLS. REFRIGERATION AND LIQUEFACTION TECHNIQUES AND PLANT |
BS 1000(621.6) | FLUIDS
HANDLING, STORAGE AND DISTRIBUTION PLANT AND EQUIPMENT |
BS 1000(621.7) | PLASTIC OR
CHIPLESS WORKING, FORMING AND TREATMENT OF MATERIALS |
BS 1000(621.8) | UNIVERSAL
DECIMAL CLASSIFICATION - MACHINE ELEMENTS. MOTIVE POWER ENGINEERING. MATERIALS HANDLING. FIXINGS. LUBRICATION |
