Popular Standards |
|
FORD WSB-M3D174-A | UNSATURATED POLYESTER (UP), 60% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS- |
FORD WSB-M3G102-B | TAPE, LOW DENSITY POLYVINYL CHLORIDE FOAM PRESSURE SENSITIVE, SUPERSOFT ***TO BE USED WITH FORD WSS-M99P11 |
FORD WSB-M3G102-B2 | TAPE, LOW DENSITY POLYVINYL CHLORIDE/NITRILE FOAM, PRESSURE SENSITIVE, ULTRA SOFT ***TO BE USED WITH FOR |
FORD WSB-M3G113-B | TAPE, PRESSURE SENSITIVE, TWO SIDED, ACRYLIC, INTERIOR |
FORD WSB-M3G138-B | TAPE, ACRYLIC CARRIER, TWO SIDE COATED, PRESSURE SENSITIVE, INTERIOR AND EXTERIOR ***TO BE USED WITH FORD |
FORD WSB-M3G143-B1 | TAPE SEALER, BUTYL COVERED, POLYURETHANE OPEN CELL FOAM CORE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G148-B | LABEL, VINYL FILM, PRESSURE SENSITIVE, INTERIOR QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G151-C1 | LABEL, VINYL, SECURITY, NONTRANSFERABLE, PRESSURE SENSITIVE |
FORD WSB-M3G151-C2 | LABEL, POLYESTER, SECURITY, NONTRANSFERABLE, PRESSURE SENSITIVE |
FORD WSB-M3G186-A | LABEL, POLYESTER FILM, PRESSURE SENSITIVE, EXTERIOR QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A*** *** |
FORD WSB-M3G187-A | LABEL, POLYESTER FILM, PRESSURE SENSITIVE, INTERIOR QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A*** *** |
FORD WSB-M3G188-A | LABEL, CERTIFICATION, BACK PRINTABLE, NON TRANSFERABLE, PRESSURE SENSITIVE ***INACTIVE FOR NEW DESIGN*** * |
FORD WSB-M3G190-A | LABEL, CERTIFICATION, DOUBLE DESTRUCT SYSTEM, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G190-B | LABEL, OVERLAY, TRANSPARENT, DOUBLE DESTRUCT, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G195-A | TAPE, ACRYLIC BASE, TWO SIDE PRESSURE SENSITIVE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G205-A | TAPE, MODIFIED POLYVINYL CHLORIDE, HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G208-A | LABEL, POLYESTER FILM, TAMPER PROOF, PRESSURE SENSITIVE, INTERIOR QUALITY ***INACTIVE FOR NEW DESIGN*** ** |
FORD WSB-M3G209-A | TAPE, BUTYL, PRESSURE SENSITIVE, EXTRUDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G210-A | TAPE, ELASTOMERIC, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G212-A | TAPE, LOW DENSITY EPDM FOAM, PRESSURE SENSITIVE, SUPERSOFT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G221-A | TAPE, ADHESIVE, PRESSURE SENSITIVE, TWO SIDED, ACRYLIC, MEDIUM TACK, INTERIOR ***TO BE USED WITH FORD |
FORD WSB-M3G222-A | TAPE, ADHESIVE, PRESSURE SENSITIVE, TWO SIDED, ACRYLIC, UV RESISTANT, HIGH TACK, INTERIOR ***TO BE USED |
FORD WSB-M3G223-A | TAPE, PRESSURE SENSITIVE, REMOVABLE (NON-STAINING) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G224-A | TAPE, POLYETHYLENE, PRESSURE SENSITIVE, INTERIOR - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G225-A | TAPE, PRESSURE SENSITIVE, NON-STAINING, TEARABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3G89-D | TAPE, URETHANE FOAM CARRIER, TWO SIDE COATED, PRESSURE SENSITIVE, INTERIOR AND EXTERIOR ***TO BE USED WITH |
FORD WSB-M3H103-B1 | CARPET, POLYPROPYLENE, RANDOM VELOUR NEEDLED, LATEX BACKCOATED, SHEARED |
FORD WSB-M3H103-B2 | CARPET, POLYPROPYLENE, RANDOM VELOUR NEEDLED, NON-BACKCOATED, SHEARED |
FORD WSB-M3H104-A | CARPET, POLYPROPYLENE, DILOUR, NEEDLED, MOLDABLE |
FORD WSB-M3H104-A2 | CARPET, POLYPROPYLENE, DILOUR NEEDLED, LATEX BACKCOATED |
FORD WSB-M3H105-A1 | CARPET, POLO PATTERN, 100% RECYCLED POLYESTER FIBER, FLAT NEEDLED, POLYPROPYLENE BACKCOATED, SPUN BONDED |
FORD WSB-M3H105-A2 | CARPET, POLO PATTERN, 100% RECYCLED POLYESTER FIBER, FLAT NEEDLED, POLYETHYLENE BACKCOATED, SPUN BONDED |
FORD WSB-M3H105-A3 | CARPET, POLO PATTERN, 100% RECYCLED POLYESTER FIBER, FLAT NEEDLED, LATEX BACKCOATED ***TO BE USED WITH |
FORD WSB-M3H106-A | CARPET, POLYESTER, RANDON DILOUR, NEEDL AND SHEARED, BILAMINATE, 560 G/M2 |
FORD WSB-M3H112-A1 | CARPET, POLYESTER, FLAT NEEDLED, POLYETHYLENE BACKCOATED, SPUN BONDED BACKING, 236 G/M |
FORD WSB-M3H112-A2 | CARPET, POLYESTER, FLAT NEEDLED, LATEX BACKCOATED, 236 G/M2 |
FORD WSB-M3H114-A | CARPET, NYLON, TALLY PATTERN, SBR LATEX BACKCOAT, 710 G/M2 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M3H87-D | CARPET, POLYESTER, RANDOM VELOUR, NEEDLED |
FORD WSB-M4A177-A | WIRE - SILICON BRONZE BRAZING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD WSB-M4A178-A1 | BRASS ROD, LOW FUMING, BARE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD E-MR001-4013 | CARBON FINES |
FORD E-MR001-4014 | NODULAR IRON BACK SCRAP |
FORD E-MR001-4015 | GRAY IRON BACK SCRAP |
FORD E-MR001-4016 | GRAY IRON BORINGS ( COMPRESSED IN STEEL CONTAINERS ) |
FORD E-MR001-4017 | FERRO MANGANESE |
FORD E-MR001-4018 | FERRO CHROME |
FORD E-MR001-4021 | FERRO MANCANESE FINES |
FORD E-MR001-4022 | SILICON CARBIDE BRIQUETTES |
FORD E-MR001-4023 | HOT PRESSED CAST IRON BRIQUETTES |
FORD E-MR001-4024 | STEEL SCRAP FOR ELECTRIC MELTING (18" STEEL) |
FORD E-MR001-4025 | FRAGMENTISED STEEL SCRAP |
FORD E-MR002-4001 | BISMUTH PELLETS |
FORD E-MR002-4002 | CARBON RECABURISER (PETROLEUM COKE) |
FORD E-MR002-4003 | SILICON CARBIDE GRANULAR |
FORD E-MR002-4004 | MANGANESE: CHROMIUM: COMPOSITE: BRIQUETTES |
FORD E-MR003-011A | LIMESTONE |
FORD E-MR003-013 | FLUORSPAR (BRIQUETTES) |
FORD E-MR003-016 | LADLE FLUX FOR NODULAR IRON |
FORD E-MR003-4004 | FLUORSPAR (HIGH GRADE) |
FORD E-MR004-0022 | COAL DUST |
FORD E-MR004-029 | MOULD SEALER |
FORD E-MR004-056B | FURAN LIQUID CORE BINDER AND CATALYST |
FORD E-MR004-067 | CEREAL CORE BINDER |
FORD E-MR004-068 | BENTONITE |
FORD E-MR004-069A | REFRACTORY CORE PASTE |
FORD E-MR004-069C | LIQUID CORE ADHESIVE |
FORD E-MR004-072 | RED IRON OXIDE |
FORD E-MR004-4000 | IRON ORE CONCENTRATES FOR USE IN FOUNDRIES |
FORD E-MR004-4001 | CUPOLA BED SAND |
FORD E-MR004-4002 | SILICA SAND - COARSE GRAIN |
FORD E-MR004-4004 | SILICA SAND - MEDIUM FINE GRAIN |
FORD E-MR004-4006 | RESIN COATED SILICA SAND |
FORD E-MR004-4007 | PROCESSED SILICA SAND - FINE GRAIN |
FORD E-MR004-4009 | METAL MOULD WASH-HYDRATED LIME |
FORD E-MR004-4011 | LINSEED OIL |
FORD E-MR004-4012 | HOT SHELL ADHESIVE |
FORD E-MR004-4015 | LIQUID RELEASE AGENT |
FORD E-MR004-4017 | PHENOLIC LIQUID CORE BINDER AND CATALYST |
FORD E-MR004-4018 | WASHED & DRIED SILICA SAND - MEDIUM COARSE GRAIN |
FORD E-MR004-4020 | PROCESSED SILICA SAND - MEDIUM GRAIN |
FORD ESB-M3P2-A | PHOSPHATE COATING, IRON, LIGHT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M3P27-A | PHOSPHATE BASE, BONDED PTFE RESIN COLORED COATING, STEEL |
FORD ESB-M3P4-A | PHOSPHATE COATING PLUS OIL - 72 HOURS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M3P5-A | PHOSPHATE COATING PLUS OIL - 96 HOURS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4A170-A | WELDING ELECTRODE, CO2 PROCESS, COILED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D100-A2 | POLYCARBONATE (PC), OPTICAL GRADE - COATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D100-A3 | POLYCARBONATE (PC), OPTICAL GRADE - UNCOATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D100-C1 | POLYCARBONATE (PC), LOW TEMPERATURE IMPACT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D103-A | TUBING, POLYVINYL CHLORIDE - EXTRUDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D113-C | POLYURETHANE FOAM, FLEXIBLE SLAB AND MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D119-B | POLYVINYL CHLORIDE COMPOUND, EXTRUSION GRADE |
FORD ESB-M4D128-A | POLYETHYLENE, FOAM - PRESSURE SENSITIVE ADHESIVE BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D133-A | NYLON, GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D137-B | POLYVINYL CHLORIDE PLASTISOL, CAST ON STEEL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D145-A | POLYETHYLENE (PE), LINEAR, BLOW MOLDING COMPOUND |
FORD ESB-M4D147-A | POLYETHYLENE (PE), LINEAR - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D148-A | POLYVINYL CHLORIDE (PVC) COPOLYMER, HOT DIP PLASTISOL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D151-A | POLYETHYLENE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D152-A | POLYETHYLENE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
FORD ESB-M4D153-A | POLYETHYLENE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
