Popular Standards |
|
GME QK 000657 | BLEND FROM PBT AND SAN WITH GLASS FIBRES |
GME QK 000658 | POLYETHERIMIDE WITH GLASS FIBRES |
GME QK 000660 | POLYETHERIMIDE |
GME QK 000705 | POLYETHYLENE TEREPHTHALATE WITH GLASS FIBRES |
GME QK 000708 | POLYETHYLENE TEREPHTHALATE WITH GLASS FIBRES; FLAME RETARDANT |
GME QK 000712 | PHENOPLAST WITH ASBESTOS FIBRES |
GME QK 000756 | POLYURETHANE WITH MINERAL FIBRES OR GLASS FIBRES |
GME QK 000977 | BLEND FROM PP AND EPR WITH MINERALS |
GME QK 000984 | BLEND FROM PP AND EPDM WITH MINERALS |
GME QK 001007 | POLYPROPYLENE-BLOCK COPOLYMER |
GME QK 001075 | POLYETHYLENE |
GME QK 001083 | BLEND FROM PP AND EPDM |
GME QK 001092 | POLYPROPYLEN / EPDM BLEND |
GME QK 001100 | POLYAMIDE 46 WITH GLASS FIBRES |
GME QK 001137 | HIGH IMPACT RESISTANT MODIFIED COPOLYAMIDE |
GME QK 001148 | POLYAMIDE 6 WITH GLASS BEADS AND GLASS FIBRES |
GME QK 001184 | POLYAMIDE 66 WITH GLASS BEADS |
GME QK 001186 | POLYAMIDE 66, ELASTOMER MODIFIED AND REINFORCED WITH GLASS FIBRE |
GME QK 001215 | POLYAMIDE 6 WITH MINERALS |
GME QK 001260 | BLEND FROM PA66,PA6 AND PE |
GME QK 001262 | POLYPHTHALAMIDE REINFORCED WITH MINERALS |
GME QK 001264 | POLYARYLAMIDE |
GME QK 001266 | BLEND FROM POLYAMIDE 5 AND POLYPROPYLENE |
GME QK 001319 | BLEND FROM PA66, PA6 AND PE WITH GLASS FIBRES |
GME QK 001320 | BLEND FROM PA66, PA6 AND PE WITH GLASS FIBRES |
GME QK 001325 | PA46 WITH GLASS FIBRES |
GME QK 001338 | POLYAMIDE 612 |
GME QK 001340 | BLEND FROM PA66 AND PA6 WITH MINERALS |
GME QK 001800 | BLEND FROM PP AND EPDM WITH TALC |
GME QK 001801 | POLYPROPYLENE COPOLYMER WITH TALC |
GME QK 001806 | POLYPROPYLENE HOMOPOLYMER WITH MINERALS |
GME QK 001808 | POLYPROPYLENE/EPDM - BLEND |
GME QK 001809 | POLYPROPYLENE HOMOPOLYMER WITH GLASS FIBRES |
GME QK 001810 | POLYPROPYLENE - COPOLYMER |
GME QK 001811 | POLYPROPYLENE - COPOLYMER WITH TALC |
GME QK 001812 | POLYPROPYLENE - COPOLYMER WITH TALC |
GME QK 001814 | POLYPROPYLENE - HOMOPOLYMER WITH GLASS FIBRES |
GME QK 001815 | BLEND FROM PP AND EPDM WITH TALC |
GME QK 001816 | POLYPROPYLENE - COPOLYMER WITH TALC |
GME R-0-1 | PERFORMANCE TEST PROCEDURE FOR PASSENGER VEHICLES INCLUDING VANS AND PICK-UPS WHICH ARE DERIVATIVES OF PASSENGER VEHICLES |
GME R-0-10 | LIGHT TRUCK DRIVING SCHEDULE, PROGRAM NO. 28 PD |
GME R-0-11 | 58 000 KM (36 000 MILE) DURABILITY TEST, MILLBROOK PG |
GME R-0-12 | MEASUREMENT OF VEHICLE CLEARANCE CIRCLE |
GME R-0-13 | DURABILITY DRIVING SCHEDULE, DPG 31 |
GME R-0-14 | EXTERIOR SOUND LEVEL ANALYSIS (HARMONIZED) |
GME R-0-17 | DRIVING SCHEDULE FOR THE DURABILITY TEST DPG E0 - ITDC PROVING GROUND DUDENHOFEN |
GME R-0-19 | DRIVING SCHEDULE FOR THE DURABILITY TEST - DPG G0 - ITDC PROVING GROUND DUDENHOFEN |
GME R-0-2 | PROCEDURE FOR THE DETERMINATION OF PERMISSIBLE TRAILER LOADS FOR PASSENGER CARS |
GME R-0-20 | VEHICLE INTERIOR NOISE TEST TIRE/ROAD TEST |
GME R-0-24 | SQUEAK AND RATTLE DETERIORATION TEST FOR PASSENGER CARS - DPG S&R |
GME R-0-3 | VEHICLE AND COMPONENT PAVE TEST |
GME R-0-6 | DETERMINATION OF VEHICLE CORROSION BEHAVIOUR - DPG 15 |
GME R-0-7 | GENERAL DURABILITY ROAD TEST, DPG 1 |
GME R-0-8 | DURABILITY DRIVING SCHEDULE FOR 3- AND 4-SPEED AUTOMATIC TRANSMISSIONS, DPG 22 |
GME R-01A02R-01 | AIRBAG - MISCUE TEST |
GME R-1-10 | BODY CONTAMINATION |
GME R-1-12 | DUST-TIGHT PROPERTIES AND DUST DEPOSITS, BODY THIS STANDARD MAY BEAPPLIED ONLY FOR CURRENT PROJECTS INCL. GLOBAL EPSILON |
GME R-1-2 | BODY WATER- TIGHTNESS THIS STANDARD MAY BE APPLIED ONLY FOR CURRENT PROJECTS INCL. GLOBAL EPSILON E (37##). IT IS SUPERCED |
GME R-1-4 | GROUND CLEARANCE TEST |
GME R-1-5 | CARBON MONOXIDE MEASUREMENT IN THE INTERIOR OF A PASSENGER CAR |
GME R-1-6 | BODY BUCKLING TEST- REAR AXLE (ICELAND TEST) |
GME R-1-7 | CO-MEASUREMENT IN THE INTERIOR OF A PASSENGER CAR, SWEDEN AND DENMARK TEST |
GME R-1-9 | FRONT AXLE (ICELAND TEST) |
GME R-10B-1 | TIRE FUNCTION TEST |
GME R-10B-10 | TREAD NOISES |
GME R-10B-11 | TYRE TREAD NOISE (SUBJECTIVE EVALUATION) NOTE: THIS SPECIFICATION MAY BE APPLIED ONLY FOR CURRENT PROJECTS INCL. |
GME R-10B-12 | STRAIGHT AHEAD STABILITY |
GME R-10B-13 | TIRES STEERING RESPONSE |
GME R-10B-14 | LATERAL STIFFNESS OF TIRES |
GME R-10B-15 | RIDGING THIS STANDARD MAY BE APPLIED ONLY FOR CURRENT PROJECTS INCL. GLOBAL EPSILON E (37##). IT IS SUPERCEDED FOR |
GME R-10B-16 | VEHICLE HANDLING ON WET ROAD SURFACE (WET HANDLING) |
GME R-10B-17 | BRAKING DISTANCE IN WET CONDITIONS |
GME R-10B-18 | AQUAPLANING, LONGITUDINAL DIRECTION |
GME R-10B-19 | AQUAPLANING, TRANSVERSE DIRECTION |
GME R-10B-20 | CHARACTERISTICS IN WINTER CONDITIONS |
GME R-10B-21 | TIRE RUN-IN AND INITIAL EVALUATION |
GME R-10B-22 | MAXIMUM POTHOLE TEST |
GME R-10B-23 | TIRE BEAD UNSEATING TEST |
GME R-10B-24 | UNBALANCE TEST OVER COVER WHEEL |
GME R-10B-25 | RETAINING FORCE OF WIRE RINGS IN COVER WHEELS |
GME R-10B-26 | MEASUREMENT OF THE RETAINING FORCE OF COVER WHEEL |
GME R-10B-27 | DROP TEST "B" COVER WHEEL |
GME R-10B-28 | DROP TEST "A" COVER WHEEL |
GME R-10B-3 | TEST OF PRODUCTION TIRES |
GME R-10B-30 | MEASUREMENT OF BRAKING DISTANCE ON DRY ROAD SURFACE |
GME R-10B-4 | TIRES - SUDDEN AIR LOSS |
GME R-10B-6 | RIDE EVALUATION |
GME R-10B-7 | PRODUCTION RELEASE CHECK FOR TIRES (SUMMER TYPE) |
GME R-10B-9 | ROLLING BEHAVIOUR |
GME R-10C-01 | WHEEL CLEARANCE: FRONT AND REAR AXLE |
GME R-11E-1 | TEST OF ENGINE COMPARTMENT INSULATION STRENGTH TEST ON GROUND CONTACT THIS SPECIFICATION MAY BE APPLIED ONLY FOR |
GME R-12-1 | CURRENT CONSUMPTION MEASUREMENT |
GME R-12C-2 | DIRECTIONS FOR THE ADJUSTMENT OF LIGHTS |
GME R-12J-3 | SPEEDOMETER CALIBRATION |
GME R-12L-1 | RADIO INTERFERENCE SUPPRESSION TEST RIDE IN THE RUSSELSHEIM AREA |
GME R-14D-1 | SPECIAL PROGRAM DURABILITYTEST ROOF LOAD CARRIER |
GME R-1A01-1 | FRONT AND REAR TOWING LUGS-ROAD TEST |
GME R-1A01-2 | LASHING OF VEHICLES FOR LAND AND SEA TRANSPORT |
GME R-1A02-1 | UNDERHOOD AND COMPONENT TEMPERATURES |
GME R-1A15-1 | STRENGTH TEST OF BODY DURING LIFT |
