Language:
    • Available Formats
    • Options
    • Availability
    • Priced From ( in USD )
    • Printed Edition
    • Ships in 1-2 business days
    • $52.00
    • Add to Cart
    • Printed Edition + PDF
    • Immediate download
    • $70.00
    • Add to Cart

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

1.1''This specification covers polymer modified bituminous sheet materials intended for use as underlayment on roof eaves, or valleys, or both, to prevent leakage of shingle, tile, or metal roofs from water back-up due to ice dams.

1.2''These underlayment sheets have a sticky adhesive layer which is exposed by removal of a protective sheet. The top surface is suitable to work on during the application of the exposed roofing.

1.3''Table of Contents:''

''

Section

Scope

1

Referenced Documents

2

Terminology

3

Workmanship, Finish, and Appearance

4

Physical Requirements

5

Sampling

6

Test Methods

7

'''''''''''''''Conditioning

7.1

'''''''''''''''Thickness

7.2

'''''''''''''''Maximum Load and Elongation at Break

7.3

'''''''''''''''Adhesion to Plywood

7.4

'''''''''''''''Thermal Stability

7.5

'''''''''''''''Flexibility at '''29'''''C ['''20'''''F]

7.6

'''''''''''''''Tear Resistance

7.7

'''''''''''''''Moisture Vapor Permeability

7.8

'''''''''''''''Capability to Seal Around Nail
'''''''''''''''''''''''''''(Head of Water Test)

7.9

'''''''''''''''Waterproof Integrity of Side Lap Seam
'''''''''''''''''''''''''''(Head of Water Test)

7.10

Inspection

8

Rejection and Rehearing

9

Packaging and Package Marking

10

Keywords

11

1.4''The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.5''This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6''This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

 

Document History

  1. ASTM D1970/D1970M-21

    👀currently
    viewing


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Most Recent
  2. ASTM D1970/D1970M-20


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  3. ASTM D1970/D1970M-19


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  4. ASTM D1970/D1970M-18


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  5. ASTM D1970/D1970M-17a


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  6. ASTM D1970/D1970M-17


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  7. ASTM D1970/D1970M-16


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  8. ASTM D1970/D1970M-15a


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  9. ASTM D1970/D1970M-15


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  10. ASTM D1970/D1970M-14


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  11. ASTM D1970/D1970M-13a


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  12. ASTM D1970/D1970M-13


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  13. ASTM D1970/D1970M-11


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  14. ASTM D1970-09


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  15. ASTM D1970-08


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  16. ASTM D1970-01


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version
  17. ASTM D1970-00


    Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    • Historical Version