Standards Store
Store Home   |    My Account   |    Help & Support   |    About IHS Markit   |    Contact IHS Markit   |    Sign In   
Standards Store Homepage TIA Standards Homepage Order online or call our sales team: 1-877-413-5184
Look Inside

SNZ AS/NZS 60335.2.102

2018 Edition, November 30, 2018

Complete Document

Household and similar electrical appliances – Safety – Part 2.102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections

Detail Summary

Active, Most Current

Additional Comments:
SAME AS SAA AS/NZS 60335.2.102 & IEC 60335-2-102
Price (USD)
Single User
In Stock
Add to Cart

Product Details:

  • Revision: 2018 Edition, November 30, 2018
  • Published Date: November 30, 2018
  • Status: Active, Most Current
  • Document Language: English
  • Published By: Standards New Zealand (SNZ)
  • Page Count: 11
  • ANSI Approved: No
  • DoD Adopted: No

Description / Abstract:


This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee EL-002 - Safety of Household and Similar Electrical Appliances and Small Power Transformers to supersede AS/NZS 60335.2.102:2013 three years from the date of publication. During this period AS/NZS 60335.2.102:2013 will also remain current. Regulatory authorities that reference this Standard in regulation may apply these requirements at a different time. Users of this Standard should consult with these authorities to confirm their requirements.

The objective of this Standard is to provide manufacturers, designers, regulatory authorities, testing laboratories and similar organizations with safety requirements designed to give the user protection against hazards that might occur during normal operation and abnormal operation of the appliance and which may be used as the basis for approval for sale or for connection to the electricity supply mains in Australia and New Zealand.

The text of IEC 60335-2-102 Ed 2, prepared by IEC Technical Committee TC 61, was submitted to the Standards Australia/Standards New Zealand Combined Procedure (dual public comment and committee vote) for adoption of the IEC standard as a Standards Australia/Standards New Zealand joint standard.

The principal changes in this edition as compared with the 2013 edition of AS/NZS 60335.2.102 are as follows (minor changes are not listed):

– a spillage test is introduced for appliances that have a flat surface on which a cup may be placed (15.101); – terms and definitions were renumbered;

– some notes have been converted to normative text or deleted (19.11.2, 22.103);

– the text has been aligned with the 2011 Edition of Part 1.

This Standard is an adoption with national modifications of the second edition of IEC 60335-2- 102, Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections. It has been varied as indicated to take account of Australian and New Zealand conditions.

This part 2 has to be used in conjunction with the latest edition of AS/NZS 60335.1 Household and similar electrical appliances – Safety – Part 1: General requirements and its Amendments. It was established on the basis of AS/NZS 60335.1:2011.

This part 2 supplements or modifies the corresponding clauses of AS/NZS 60335.1 so as to convert it into the Australian/New Zealand Standard: Safety requirements for gas, oil and solid-fuel burning appliances having electrical connections. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states "addition", "modification" or "replacement", the relevant text of Part 1 is to be adapted accordingly.

NOTE 1 The following numbering system is used:

– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;

– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause;

– additional annexes are lettered AA, BB, etc.;

– subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letters AZ.

NOTE 2 The following print types are used:

– requirements: in roman type;

– test specifications: in italic type;

– notes: in small roman type.

Words in bold in the text are defined in Clause 3.

NOTE 3 In this document, is used in the margin to indicate instructions for preparing a consolidated version.

The essential safety requirements in AS/NZS 38201 that could be applicable to requirements for gas, oil and solid-fuel burning appliances having electrical connections are covered by this standard.

The national variations to IEC 60335-2-102 Ed 2 form the Australian and New Zealand national variations for purposes of the IECEE scheme for recognition of results of testing to standards for safety of electrical equipment (the CB scheme).

1 AS/NZS 3820 Essential safety requirements for electrical equipment