Hello. Sign In
Standards Store


4th Edition, October 2015

Complete Document

Adhesive, Promoter, Foam Tape

View Abstract
Product Details
Document History

Detail Summary

Active, Most Current

Additional Comments:
Price (USD)
Single User
In Stock
PDF + Print
In Stock
$57.60 You save 20%
Add to Cart

People Also Bought These:


Referenced Items:


Product Details:

  • Revision: 4th Edition, October 2015
  • Published Date: October 2015
  • Status: Active, Most Current
  • Document Language: English
  • Published By: General Motors Company (GMNA)
  • Page Count: 3
  • ANSI Approved: No
  • DoD Adopted: No

Description / Abstract:

This specification details the properties and requirements of a solvent based adhesion promoter that is designed for use on raw reaction injection molding (RIM), and flexible paint systems used as the topcoats for RIM and/or thermoplastic olefin (TPO) fascias and bumper covers.

Material Description. The adhesion promoter is an air dry system that can be applied with a pressurized flow gun, brush or similar applicator. The product is utilized as a means to increase the short term (quick tack) adhesion of foam pressure sensitive adhesive tapes used to mount insert strips, moldings, and other components.

Symbols. Not applicable. 

Applicability. Tape-attached components bonding to RIM or flexible paint systems. 

Remarks. The application surface must be clean, dry and free of foreign matter. Contaminated surfaces should be cleaned with a dry, untreated lint-free cloth and an alcohol/water or naphtha wipe. The promoter should be applied in a thin, uniform coat on the surface to be activated. Allow for thorough drying (1 to 3 minutes) prior to applying the tape. Tape should be applied within one hour for best results.