Hello. Sign In
Standards Store

Look Inside

ASME B29.8

10th Edition, 2010

Complete Document

Leaf Chains, Clevises, and Sheaves

Includes all amendments and changes through Reaffirmation Notice , 2017

View Abstract
Product Details
Document History

Detail Summary

Active, Most Current

Price (USD)
Secure PDF
Single User
In Stock
PDF + Print
In Stock
$83.30 You save 15%
Add to Cart

People Also Bought These:

ASTM A106/A106M
ASTM A333/A333M
API 579-1
ASME B31.3

Product Details:

  • Revision: 10th Edition, 2010
  • Published Date: January 2017
  • Status: Active, Most Current
  • Document Language: English
  • Published By: ASME International (ASME)
  • Page Count: 36
  • ANSI Approved: Yes
  • DoD Adopted: No

Description / Abstract:


For many years, roller chain manufacturers have furnished a substantial volume of chains consisting of link plates assembled on pins without the use of bushings and rollers. These chains provide relatively high strength per unit of weight and have found wide usage where sprockets are not required and high-speed power transmission characteristics are not needed.

Previously, variation in link plate thickness, link plate contour, diameter of pins, and the method of lacing limited its interchangeability and restricted its use. For these reasons the Association of Roller and Silent Chain Manufacturers appointed a task subcommittee on September 21, 1951 to develop this Standard.

The scope of the resultant Standard covers the lacing, pin diameter, diameter of link plate holes, link plate contour and thickness, chain widths, and minimum ultimate tensile strengths. The Standard also recommends clevis and sheave design. Supplementary information to guide users in the application of these chains appeared in the 1958 edition and was deleted in 1960.

The 1971 reaffirmation was approved by the American National Standards Institute on September 10, 1971.

Prior to 1975, all B29.8 leaf chain standards included both Type A and Type B leaf chain designs. Type A, the lighter series, was characterized by even or balanced lacing, while Type B, the heavier series, was shown only with uneven or unbalanced lacing of chain links.

During the decade preceding 1975, it became increasingly apparent that the use of Type A leaf chain was declining and that it was being used primarily for replacement. Most new design applications used the heavier Type B design either with the standard uneven lacing or with even lacing, which was shown as standard only for Type A leaf chain. The increased use of Type B chain and the desire to simplify chain standards led the American Chain Association to undertake a revision of B29.8 to:

(a) eliminate Type A leaf chain from the standard;

(b) add even lacing (balanced) to the Type B chain series;

(c) include a 2½ in. pitch chain to the list of Type B chain.

These revisions were subsequently included in ANSI B29.8-1977 and approved by the American National Standards Institute on May 4, 1977.

In tabulating dimensional information in this Standard, customary inch-pound units have been used. Additionally, companion tabulations have been included that provide metric (S.I.) unit conversions of these values in accordance with SI-1, ASME Orientation and Guide for Use of SI (Metric) Units. Certain formulas and relationships have intentionally been presented only in customary units to eliminate ambiguity between them and the tabulated values.

Revisions incorporated in ANSI/ASME B29.8M-1985 provided additional information on clevises, clevis pins, minimum sheave size, and lubrication.

Revisions incorporated in ASME B29.8M-1993 included changes in format, restatement of the definition of Minimum Ultimate Tensile Strength and, most notably, minor changes in the standard values for maximum pin diameter and the minimum hole diameter. The dimensional changes were required to allow a direct, error-free conversion between conventional units (inches) and metric units (millimeters).

Revisions incorporated in ASME B29.8-2002 include the elimination of 8X8 lacing. Tables 1 and 2 were revised to show minimum width between outside plates (Lm) and Tables 4 and 5 were revised to show the dimensions for an inside clevis. An appendix was added containing information on lubrication and maintenance, connect and disconnect, and general inspection criteria. Preload and manufacturer's identification marking were added in compliance with the requirements of ISO 4347.

Revisions incorporated in ASME B29.8-2010 include upside down rotation of Fig. 1, deletion of the Lm term and its definition in para. 1.3 and Fig. 3. Also changed is the final sentence of para. 1.4 concerning manufacturers' responsibility for ensuring that their chains are properly connected; deletion of columns headed "Lm" from Tables 1 and 2; and in Table 1 correcting the Wmax values from the BL-5xx chains (the prior values were identical to those for BL-4xx chains). This Standard was approved by the American National Standards Institute on November 18, 2010.