ASTM D1683/D1683M-17(2018)

Standard Test Method for Failure in Sewn Seams of Woven Fabrics

standard by ASTM International , 03/15/2018

View all product details

Most Recent

Track It

- Available Formats
  ℹ
- Options
- Availability
- Priced From ( in USD )
- PDF
- 👥
- Immediate download
- $56.00
- Add to Cart
- Printed Edition
- Ships in 1-2 business days
- $56.00
- Add to Cart
- Printed Edition + PDF
- Immediate download
- $76.00
- Add to Cart

Customers Who Bought This Also Bought

ASTM D1776/D1776M-20
Priced From $50.00
ASTM D3938-18(2023)
Priced From $63.00
ASTM D737-18(2023)
Priced From $57.00
ASTM D3776/D3776M-20
Priced From $52.00

Full Description

1.1 This test method measures the sewn seam strength in woven fabrics by applying a force perpendicular to the sewn seams.

1.1.1 The axis perpendicular to the sewn seam can represent either the warp yarn axis or filling yarn axis, the same axis tested when using grab Test Method D5034.

1.1.1.1 This test method is applicable to sewn seams obtained from a previously sewn article or seams sewn with fabric samples using one of two specific seam assemblies as shown in Table 1.

(A) A complete description of seam types and stitch types can be found in Practice D6193.

Note 1: When the performance of a woven textile structure requires data to indicate the maximum seam strength that will result in the failure of fabric on either side of seam, the standard seam can be changed to use the Lapped seam type construction with two or more rows of stitching: Lsc-2; Lsc-3; Lsc-4; and the maximum number of stitches per inch that can be used. (See Practice D6193.)

1.2 This test method is used when the maximum breaking force measurement to rupture of a woven fabric sewn seam is required.

1.2.1 This test method is used when the seam efficiency measurement of a woven fabric sewn seam is required.

1.2.2 This test method is used to identify the sewn seam strength threshold at which the failure of the stitching occurs, without damage to the fabric, so that the textile product can be repaired.

1.2.3 This test method is used to identify the force at which seam strength results in slippage and displacement of warp yarns, filling yarns, or any combination of these yarns.

1.3 This test method does not predict actual wear performance of a seam.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Product Details

Published:: 03/15/2018
Number of Pages:: 15
File Size:: 1 file , 280 KB
Note:: This product is unavailable in Russia, Ukraine, Belarus