Hello. Sign In
Standards Store
Look Inside

AWWA C507

2015 Edition, January 24, 2015

Complete Document

Ball Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm)



View Abstract
Product Details
Document History

Detail Summary

Active, Most Current

EN
Format
Details
Price (USD)
Secure PDF
Single User
$85.00
Print
In Stock
$85.00
Add to Cart

People Also Bought These:

ASME B31.3
CSA B1800
ASME B16.34
ASCE 5-11/6-11

Product Details:

  • Revision: 2015 Edition, January 24, 2015
  • Published Date: January 24, 2015
  • Status: Active, Most Current
  • Document Language: English
  • Published By: American Water Works Association (AWWA)
  • Page Count: 44
  • ANSI Approved: Yes
  • DoD Adopted: No

Description / Abstract:

This standard covers gray-iron, ductile-iron, and cast-steel flanged-end, low leakage, shaft- or trunnion-mounted, full-port, double- and single-seated ball valves for pressures up to 150 psi (1,050 kPa) in sizes 6-in. through 60-in. (150-mm through 1,500-mm) diameter and pressures up to 300 psi (2,100 kPa) in sizes from 6-in. through 48-in. (150-mm through 1,200-mm) diameter for use in water, wastewater, and reclaimed water systems having water with a pH greater than 6 and less than 12 and with temperatures greater than 32°F (0°C) and less than 125°F (52°C).

Design fluid velocity. The valve assembly shall be structurally suitable for a port fluid velocity (class D) of 35 ft/sec (10.7 m/sec) at design pressure and shall be within the allowable stresses noted in Sec. 4.3.1

Pressure class and rated/design pressure. The classes of valves discussed in this standard shall be designed for the following maximum rated pressure (Table 1). Rated pressure is defined as the design pressure at 100°F (38°C). Sec.

Purpose

The purpose of this standard is to provide the minimum requirements for 6-in. through 60-in. (150-mm through 1,500-mm) ball valves for water, wastewater, and reclaimed water supply service, including material, design, inspection, testing , marking, handling, and packaging for shipment.

Standard Methods for the Examination of Water and Wastewater