Hello. Sign In
Standards Store
Look Inside

AWWA C907

2017 Edition, June 11, 2017

Complete Document

Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water, Wastewater, and Reclaimed Water Service



View Abstract
Product Details
Document History

Detail Summary

Active, Most Current

EN
Additional Comments:
FIRST EDITION
Format
Details
Price (USD)
Secure PDF
Single User
$86.00
Print
In Stock
$86.00
Add to Cart

People Also Bought These:

BS ISO 55000 SERIES
ASME PTB-3
ASME PTB-4
ANSI/HI 2.3

Product Details:

  • Revision: 2017 Edition, June 11, 2017
  • Published Date: June 11, 2017
  • Status: Active, Most Current
  • Document Language: English
  • Published By: American Water Works Association (AWWA)
  • Page Count: 32
  • ANSI Approved: Yes
  • DoD Adopted: No

Description / Abstract:

This standard describes Pressure Class 235 (PC235) polyvinyl chloride (PVC) injection-molded fittings with push-on rubber-gasketed joints in nominal sizes 4 in. through 12 in. (100 mm through 300 mm)* for use in water, wastewater, and reclaimed water service. The fittings are for use with PVC and molecularly oriented polyvinyl chloride (PVCO) pressure pipe having an outside diameter conforming to the dimensions of cast-iron pipe and with dimension ratios (DRs) of 18 (Pressure Class 235) or 25 (Pressure Class 165), as described in ANSI/AWWA C900, Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 60 In. (100 mm Through 1,500 mm), AWWA Manual M23—PVC Pipe—Design and Installation, and ANSI/AWWA C909, Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. and Larger.

Purpose

The purpose of this standard is to provide the minimum requirements for PVC injection-molded pressure fittings, 4 in. to 12 in. (100 mm to 300 mm), for underground PVC and PVCO pressure-pipe systems.

Application

This standard can be referenced in specifications for purchasing and receiving injection-molded PVC pressure fittings, 4 in. (100 mm) and larger, for PVC and PVCO pressure-pipe systems. The stipulations of this standard apply when this document has been referenced and then only to injection-molded PVC pressure fittings, 4 in. to 12 in. (100 mm to 300 mm), for PVC and PVCO pressure-pipe systems.

*Throughout the body of this standard, metric equivalents (rounded) are set in parentheses next to the US customary units.

Standard Methods for the Examination of Water and Wastewater