Hello. Sign In
Standards Store

DSF/PREN 60068-2-27

2006 Edition, October 1, 2006

Complete Document

Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock



Detail Summary

Active, Most Current

EN
Additional Comments:
DRAFT * SAME AS IEC 60068-2-27
Format
Details
Price (USD)
PDF
Single User
$71.00
Print
In Stock
$71.00
PDF + Print
In Stock
$113.60 You save 20%
Add to Cart

Product Details:

  • Revision: 2006 Edition, October 1, 2006
  • Published Date: October 1, 2006
  • Status: Active, Most Current
  • Document Language: English
  • Published By: Dansk Standardiseringsrad (DS)
  • Page Count: 38
  • ANSI Approved: No
  • DoD Adopted: No

Description / Abstract:

This part of IEC 60068 provides a standard procedure for determining the ability of a specimen to withstand specified severities of non-repetitive or repetitive shocks.
The purpose of this test is to reveal mechanical weakness and/or degradation in specified performances, or accumulated damage or degradation caused by shocks. In conjunction with the relevant specification, this may be used in some cases to determine the structural integrity of specimens or as a means of quality control (see Clause A.2).
This test is primarily intended for unpackaged specimens and for items in their transport case when the latter may be considered to be part of the specimen. If an item is to be tested unpackaged, it is referred to as a test specimen. However, if the item is packaged, then the item itself is referred to as a product and the item and its packaging together are referred to as a test specimen. When used in conjunction with IEC 60068-2-47, this standard may be used for testing packaged products. This possibility was included in the 2005 version of IEC 60068-2-47 for the first time.
This standard is written in terms of prescribed pulse shapes. Guidance for the selection and application of these pulses is given in Annex A and the characteristics of the different pulse shapes are discussed in Annex B.
Wherever possible, the test severity and the shape of the shock pulse applied to the specimen should be such as to reproduce the effects of the actual transport or operational environment to which the specimen will be subjected, or to satisfy the design requirements if the object of the test is to assess structural integrity (see Clauses A.2 and A.4).
For the purposes of this test, the specimen is always mounted to the fixture or the table of the shock testing machine during testing.
NOTE The term "shock testing machine" is used throughout this standard, but other means of applying pulse shapes are not excluded.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
basic safety publications in the preparation of its publications.