Hello. Sign In
Standards Store
Look Inside

ICC A117.1

2017 Edition, January 1, 2017

Complete Document

Accessible and Usable Buildings and Facilities



View Abstract
Product Details
Document History

Detail Summary

Active, Most Current

EN
Additional Comments:
FIRST PRINTING: MAY 2017
Format
Details
Price (USD)
Secure PDF
Single User
$48.00
Print
Backordered
$50.00
Add to Cart

People Also Bought These:

ASME A17.1
ASME A17.2
ASME A18.1
ANSI A10.4

Product Details:

  • Revision: 2017 Edition, January 1, 2017
  • Published Date: January 2017
  • Status: Active, Most Current
  • Document Language: English
  • Published By: International Code Council (ICC)
  • Page Count: 201
  • ANSI Approved: Yes
  • DoD Adopted: Yes

Description / Abstract:

GENERAL

This standard provides technical criteria for making sites, facilities, buildings and elements accessible. The administrative authority shall provide scoping provisions to specify the extent to which these technical criteria apply. These scoping provisions shall address the application of this standard to each building and occupancy type; new construction, alterations, temporary facilities, and existing buildings; specific site and building elements; and to multiple elements or spaces provided within a site or building.

DWELLING AND SLEEPING UNITS

Chapter 11 of this standard contains dwelling unit and sleeping unit criteria for Accessible units, Type A units, Type B units, Type C (Visitable) dwelling units and units with communication features. The administrative authority shall specify, in separate scoping provisions, the extent to which these technical criteria apply. These scoping provisions shall address the types and numbers of units required to comply with each set of unit criteria.

ADMINISTRATION

The administrative authority shall provide an appropriate review and approval process to ensure compliance with this standard.

PURPOSE

General. The technical criteria in Chapters 3 through 10, Sections 1102, 1103 and 1106 of this standard make sites, facilities, buildings and elements accessible to and usable by people with such physical disabilities as the inability to walk, difficulty walking, reliance on walking aids, blindness and visual impairment, deafness and hearing impairment, incoordination, reaching and manipulation disabilities, lack of stamina, difficulty interpreting and reacting to sensory information, and extremes of physical size. The intent of these sections is to allow a person with a physical disability to independently get to, enter, and use a site, facility, building or element.

Section 1104 of this standard provides criteria for Type B units. These criteria are intended to be consistent with the intent of the criteria of the U.S. Department of Housing and Urban Development (HUD) Fair Housing Accessibility Guidelines. The Type B units are intended to supplement, not replace, Accessible units or Type A units as specified in this standard.

Section 1105 of this standard provides criteria for minimal accessibility features for one and two family dwelling units and townhouses which are not covered by the U.S. Department of Housing and Urban Development (HUD) Fair Housing Accessibility Guidelines.

This standard is intended for adoption by government agencies and by organizations setting model codes to achieve uniformity in the technical design criteria in building codes and other regulations.

Applicability. Sites, facilities, buildings, and elements required to be accessible by the scoping provisions adopted by the administrative authority shall comply with the applicable provisions of Chapters 3 through 10. Dwelling units and sleeping units shall comply with the applicable provisions of Chapter 11.