ISO 228-2 2nd Edition, January 1, 1987
Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 2: Verification by Means of Limit Gauges
Additional Comments: ENGLISH
Published By:International Organization for Standardization (ISO)
Scope and field of application
This part of ISO 226 specifies the verification, by means of limit gauges, of cylindrical threads, the dimensions and tolerances of which are given in ISO 226-l.
For industrial applications (see for example ISO 1179), it may be necessary to carry out additional checks.
Since this 66O profile has different elements to be verified, it is necessary to provide for several GO and several NOT GO gauges :
a) the threaded GO gauges (see clauses 6 and 7) shall ensure that the profile of the machined piece does not exceed the maximum of material provided for by the tolerances applied to the dimensions of the profile defined by ISO 226-l;
b) the threaded NOT GO gauges for the threads of the pieces (see clauses 6 and 7) fix the minimum material limit on the flanks of the thread.
NOTE - Reference checks may be carried out in specialized laboratories.