Hello. Sign In
Standards Store
ISO 4386-2 2nd Edition, October 15, 2012
Complete Document
Active, Most Current
Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
Additional Comments: ENGLISH
$88.00 USD
In Stock
Print  :
$88.00 USD
In Stock
The 9000 Store
This part of ISO 4386 specifies a tensile test method for determination of the bond strength between the bearing metal and the backing. The test can be applied to multilayer plain bearings with bearing metals based on lead, tin, copper or aluminium. For tested layer thicknesses of  2mm, a raw lining thickness of a minimum additional 1 mm is necessary.

The backings are to all steel, cast steel or copper alloys. The bond strength test does not apply to bearings with cast iron backing.

The test applies to all thrust bearings and to journal bearings with an inner diameter of backing 90 mm.

The test can be used for comparative investigations into the influence on the bond strength of various processes and types of material. In addition, the test is suitable for production control and for process qualification of bearing production.

For non-destructive ultrasonic testing of the bond between bearing metal and backing for bearing metal layer thicknessed 2mm, see ISO 4386-1.