L-P-512 Revision C, April 19, 1977
PLASTIC SHEET (SHEETING); POLYETHYLENE
Includes all amendments and changes through Cancellation Notice 3, April 28, 2000
Additional Comments: CNCL S/S BY ASTM D2103
This specification covers requirements for extruded sheet and sheeting and for compression molded sheets made from low, medium, and high density polyethylene and copolymers, hereinafter designated as polyethylene, conforming to L-P-390, or from other polyethylene compositions when specified.
Polyethylene sheet and sheeting shall be of the following types, classes, grades, forms, and special designations, as specified (see 6.2).
The polyethylene sheet and sheeting shall be of the types, classes, and grades as specified in table I, plus other compositions when specified (see 3.1 and 6.2).
The product shall consist of extruded sheeting (see 6.3), extruded sheet, compression molded unplaned sheet, or compression molded planed sheet, of the thickness, width, and length (or length or weight of rolls of sheeting) specified.
A special designation may be required to cover sheet or sheeting ordered against the special requirements of 3.4.