Hello. Sign In
Standards Store
MIL-P-85856/9 1988 Edition, December 7, 1988
Complete Document
Active, Most Current
POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS PURE MOLYBDENUM, TYPE I, CLASS 2, COMPOSITION A
Includes all amendments and changes through Interim Notice 2, September 4, 1998
Additional Comments: INACTIVE FOR NEW DESIGN
PDF :
$27.00 USD
In Stock
Print  :
$30.00 USD
In Stock
Print + PDF :
$39.90 USD
You save 30%
In Stock
This specification is approved for use by all Departments and Agencies of the Department of Defense.

The complete requirements for acquiring the powder described herein shall consist of this document and the latest issue of MIL-P-85856.

Chemical Composition
     Mo          O2             Others (1)
                           ----------------
                            Each   Total
    ---------------------------------------
    99.5 min.   0.15 max.    -     0.5 max.




Particle Size/Distribution
    +170 Mesh (+90 µm)    1.0 max.
    +200 Mesh (+75 µm)   15.0 max.
    +325 Mesh (+45 µm)   80.0 min.




Sprayed Coating Properties
    Bond Strength    41.4 MPa (6000 psi) min.

    Hardness         Rockwell 15N, 75 min.

    Microstructure   See paragraph 4.5.4.1.2
                     Porosity - 15% max.
                     Unmelted Particles - 15% max.




Deposit Efficiency and Deposition Rate
70% min for N2/H2 @ 9.5 lb/hr
50% min for A/H2 @ 3.5 lb/hr




Comparable Documents

Powder which meets the requirements specified is qualified under the following specifications.
    General Electric Company       B50TF41, Class A
    Pratt & Whitney Aircraft       PWA 1313
    Rolls-Royce, Ltd.              MSRR 9507/19