MIL-STD-462 Revision D, January 11, 1993
ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS, MEASUREMENT OF
Includes all amendments and changes through Cancellation Notice 4, August 20, 1999
Additional Comments: CNCL REFER TO MIL-STD-461
This standard establishes general techniques for use in the measurement and determination of the electromagnetic emission and susceptibility characteristics of electronic, electrical, and electromechanical equipment and subsystems designed or procured for use by activities and agencies of the Department of the Defense.
The testing techniques of this standard are used to obtain data for determination of compliance with the specified MIL-STD-461 requirements. The test methods contained in this document shall be adapted by the testing activity for each application. The adapted test methods shall be documented in the Electromagnetic Interference Test Procedures (EMITP) required by MIL-STD-461.
The test methods contained in this standard are designated in accordance with an alpha-numeric coding system. Each method is identified by a two letter combination followed by a three digit number. The number is for reference purposes only. The meaning of the individual letters are as follows:
C = Conducted
R = Radiated
E = Emissions
S = Susceptibility
a. Conducted emissions tests are designated by "CE---".
b. Radiated emissions tests are designated by "RE---".
c. Conducted susceptibility tests are designated by "CS---".
d. Radiated susceptibility test are designated by "RS---".
e. "---" = numerical order of test from 101 to 199.