Hello. Sign In
Standards Store
Look Inside

SNZ AS/NZS 60335.2.110

2014 Edition, November 28, 2014

Complete Document

Household and similar electrical appliances – Safety – Part 2.110: Particular requirements for commercial microwave appliances with insertion or contacting applicators

Detail Summary

Active, Most Current

Additional Comments:
SAME AS SAA AS/NZS 60335.2.110 & IEC 60335-2-110
Price (USD)
Single User
In Stock
Add to Cart

Product Details:

  • Revision: 2014 Edition, November 28, 2014
  • Published Date: November 28, 2014
  • Status: Active, Most Current
  • Document Language: English
  • Published By: Standards New Zealand (SNZ)
  • Page Count: 51
  • ANSI Approved: No
  • DoD Adopted: No

Description / Abstract:


It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons.

This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances.

This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ.

If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account.

When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies.

NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements.

This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject.

NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.

An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features which impair the level of safety covered by these requirements.

An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard.