Hello. Sign In
Standards Store


97th Edition, May 1, 1997

Complete Document

Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned Steel Type I and Type II

Includes all amendments and changes through Editorial Change , November 1, 2004

View Abstract
Product Details
Document History

Detail Summary

Not Active, See comments below

Additional Comments:
Price (USD)
Call for Quote
Add to Cart

Product Details:

  • Revision: 97th Edition, May 1, 1997
  • Published Date: November 1, 2004
  • Status: Not Active, See comments below
  • Document Language: English
  • Published By: The Society for Protective Coatings (SSPC)
  • Page Count: 6
  • ANSI Approved: No
  • DoD Adopted: No

Description / Abstract:

This specifi cation covers a French process zinc oxide, raw linseed oil and alkyd primer suitable for use over blast cleaned steel.

This is an alkyd/linseed oil primer containing 30% more alkyd resin than SSPC Paint 25. It is not recommended for hand cleaned steel.

This primer is suitable for exposures in Environmental Zones 1A (interior, normally dry) and 1B (exterior, normally dry), and is intended for brush, roller, or spray application over steel surfaces prepared in accordance with SSPC-SP 6/NACE No. 3, "Commercial Blast Cleaning," or SSPC-SP 11, "Power Tool Cleaning to Bare Metal," or better. (See Note 9.6.) It is suitable as a shop primer, fi eld primer, maintenance primer, or intermediate coat and is to be applied in accordance with SSPC-PA 1, "Shop, Field, and Maintenance Painting of Steel." If the primed part of the structure is to be exposed to the weather, it should be topcoated as soon as practical.