AGMA 6010Revision F97, 1997Complete DocumentStandard for Spur, Helical, Herringbone and Bevel Enclosed Drives
Includes all amendments and changes through Reaffirmation Notice , 2003 Detail Summary
BUNDLE AND SAVE:
Item is contained in these product bundles
Additional Comments:
W/D S/S BY AGMA 6013 AND AGMA 6113
PDF
Single User
$126.00
Print
In Stock
Need it fast? Ask for rush delivery.
Most backordered items can be rushed in from the publisher in as little as 24 hours. Some rush fees may apply. Contact your nearest IHS Markit Office to request rush delivery of any backordered item.
$126.00
PDF + Print
In Stock
Need it fast? Ask for rush delivery.
Most backordered items can be rushed in from the publisher in as little as 24 hours. Some rush fees may apply. Contact your nearest IHS Markit Office to request rush delivery of any backordered item.
$201.60
You save 20%
Description / Abstract:
AGMA 6010, Revision F97, 1997 - Standard for Spur, Helical, Herringbone and Bevel Enclosed Drives
This standard is applicable to enclosed gear drives wherein the gear tooth designs include spur, helical, herringbone or double helical, or bevel, in single or multistage units. Limitations The rating methods and influences identified in this standard are limited to enclosed drives of single and multiple stage designs where the pitch line velocities do not exceed 7000 feet per minute and pinion speeds do not exceed 4500 revolutions per minute. Overlap There is a speed and pitch line velocity overlap in the scope of this standard and the scope of ANSI/AGMA 6011-G92. ANSI/AGMA 6011-G92 permits designs down to 5000 feet per minute and pinion speeds to 3600 revolutions per minute. In the area of overlap in the scope, the standard used is dependent on the application or unit designed. All parties should be aware of the standard used and should agree on the use of that standard. Intended use This standard is not intended to assure performance of assembled gear drive systems. It is intended for use by the experienced gear designer capable of selecting reasonable values for the factors, based on his knowledge of performance of similar designs and the effects of such items as lubrication, deflection, manufacturing tolerances, metallurgy, residual stress and system dynamics. It is not intended for use by the engineering public at large. Exceptions This standard does not cover the design and application of epicyclic drives or gear blank design. This standard does not cover the rating of gear drives due to wear or scoring (scuffing) of gear teeth or components. This standard does not apply to gear drives that are covered by other specific AGMA application standards. Annexes The annexes are for reference only and are not a part of this standard. The annexes can be used to make a more detailed analysis of certain rating factors, and a guide to owner responsibilities.
Product Details:
|